Sony STR-DN1060 Скачать руководство пользователя страница 212

Страница: 212 / 232

Cannot connect the receiver to a service.

Make sure that the router or the wireless LAN router/access point is turned on.

Check [Network Connection Status]. If [Not accessible] or [Failed] appears, set up the

network connection again.

If the receiver is connected to a wireless network, move the receiver and the wireless LAN

router/access point closer to each other.

If your contract with your Internet provider limits Internet connection to one device at a

time, this device will not be able to access the Internet when another device is already

connected. Consult your carrier or service provider.

[276] Troubleshooting

Music Services

The sound skips.

The bandwidth of your network may be too low. If using wireless LAN connection, move

the receiver and the wireless LAN router/access point closer to each other, without any

obstructions between them.

[277] Troubleshooting

BLUETOOTH device

Pairing cannot be done.

Move the BLUETOOTH device closer to the receiver.

Pairing may not be possible if there are other BLUETOOTH devices near the receiver. In

this case, turn off the other BLUETOOTH devices.

Correctly enter the same passkey that was entered on the BLUETOOTH device.

[278] Troubleshooting

BLUETOOTH device

Cannot make a BLUETOOTH connection.

Confirm that the BLUETOOTH mode is selected correctly.

The BLUETOOTH device you attempted to connect does not support the A2DP profile,

Содержание STR-DN1060









































































































































































































































Результаты поиска

Содержание STR-DN1060

Отзывы:

Похожие инструкции для STR-DN1060

Бренды по названию

Популярные бренды

Sony STR-DN1060, Части и управление

Результаты поиска

Содержание STR-DN1060

Отзывы:

Похожие инструкции для STR-DN1060

Бренды по названию

Популярные бренды