STR-DN1000
14
SPECIAL MENU MODE
Procedure:
1. Press the [
?/1
] button to turn on the main power, then while pressing the [INPUT SE] button, press the [A.F.D.], [2CH/A.
DIRECT], [MUSIC], [MOVIE] button in order, the message “SPECIALIZE” appears.
2. Press the [
M
]/[
m
] buttons on the remote commander, the message “< SPECIAL>” appears.
3. Press the [
,
] button on the remote commander, the item is appears.
4. Each time the [
M
]/[
m
] buttons on the remote commander is pressed, the item is switched in order as follows.
Some items can change the content. Display the cursor by pressing the [
,
] button on the remote commander, and changing the content
by pressing the [
M
]/[
m
] buttons on the remote commander, and
fi
x the content by pressing the [
<
] button on the remote commander
when you want to change the content of the item.
5. To release from this mode, while pressing the [INPUT SE] button, press the [A.F.D.], [2CH/A. DIRECT], [MUSIC],
[MOVIE] button in order again, the message “OFF” appears.
Items
Display
Remark
Model/Destination change
MODEL
When [
,
] button on the remote commander is pressed, the message “N1
**
XX” is appears
**
: Destination
XX: fx or at
Main micom version display
N1
**
MX.XX
X.XX: System controller software version
**
: Destination
Farouja version display
F.Ver X.XX
X.XX: Farouja software version
CGROM micom version display
G.Ver X.XX
X.XX: CGROM controller software version
HDMI micom version display
H.Ver X.XX
X.XX: HDMI controller software version
DSP serial
fl
ash version display
S.Ver X.XX
X.XX: Serial
fl
ash software version
FLI update
FLI UPDATE
When [
,
] button on the remote commander is pressed, the message “ON”
or “OFF” is appears
Switching with [
M
]/[
m
] buttons on the remote commander
HD update
HD UPDATE
When [
,
] button on the remote commander is pressed, the message “ON”
or “OFF” is appears
Switching with [
M
]/[
m
] buttons on the remote commander
HDCP key read
HDCP KEY
When [
,
] button on the remote commander is pressed, the message “ON”
or “OFF” is appears
Switching with [
M
]/[
m
] buttons on the remote commander
Video Factroy
V. FACTORY
Not used for the servicing
Auto cal mic test
SP OUT
When [
,
] button on the remote commander is pressed, the message
“SOURCE” or “MIC” is appears
Switching with [
M
]/[
m
] buttons on the remote commander
SOURCE: normal mode, MIC: mode that output audio from mic input
FL display fonts test
FL FONT
When [
,
] button on the remote commander is pressed, the message
“0X
**
=X” is appears
**
: 20 to FF, X: character
Switching with [
M
]/[
m
] buttons on the remote commander
DSP halt
DSP HALT
When [
,
] button on the remote commander is pressed, the message “ON”
or “OFF” is appears
Switching with [
M
]/[
m
] buttons on the remote commander
Not used for the servicing
When EEPROM initialization is required, perform the “memory clearing
mode”
RAM WATCH
When [
,
] button on the remote commander is pressed, the message
“XXXXXXXXXX” is appears
XXXXXXXXXX: Various internal RAM
Switching with [
M
]/[
m
] buttons on the remote commander
When [
,
] button on the remote commander is pressed, the message “
****
XX” is appears
****
: EEPROM address, XX: EEPROM data
Switching with [
M
]/[
m
] buttons on the remote commander
Protector on/off
PROTECTOR
When [
,
] button on the remote commander is pressed, the message “ON”
or “OFF” is appears
Switching with [
M
]/[
m
] buttons on the remote commander
Audio swap
SWAP MODE
When [
,
] button on the remote commander is pressed, the message
“XXXXXXXXXX” is appears
XXXXXXXXXX: audio swap mode
Switching with [
M
]/[
m
] buttons on the remote commander
Volume value display (FL/FR)
L
****
RXXXX
****
: Front L-ch volume value, XXXX: Front R-ch volume value (for design
evaluation)
Volume value display (SL/SR)
S
****
SXXXX
****
: Surround L-ch volume value, XXXX: Surround R-ch volume value (for
design evaluation)
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
