STR-DN1000
11
SECTION 3
TEST MODE
TUNER AM STEP CHANGE MODE
(US, Canadian, Chilean, Peruvian and Australian models
only)
Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
Procedure:
1. Press the [
?/1
] button to turn on the main power.
2. Turn the [– INPUT SELECTOR]/[INPUT SE] but-
tons to select the “AM TUNER”.
3. Press the [
?/1
] button to turn off the main power.
4. While pressing the [DISPLAY] button, press the [
?/1
] button
to turn on the main power.
5. Either the message “AM 9k Step” or “AM10k Step” appears,
select the desired step.
SOUND FIELD CLEAR MODE
The preset sound
fi
eld is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [MUSIC] button, press the [
?/1
] button to
turn on the main power.
2. The message “S.F. CLEAR” appears and initialization is per-
formed.
INITIALIZE MODE
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [MUTING] and [SPEAKERS] buttons,
press the [
?/1
] button to turn on the main power.
2. The message “CLEARING *” appears and the memories are
reset to the default values.
3. When done, the message “CLEARED *” appears.
FLUORESCENT INDICATOR TUBE DISPLAY TEST
All
fl
uorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
1. While pressing the [MUTING] and [DISPLAY] buttons, press
the [
?/1
] button to turn on the main power.
2. All segments and all LEDs turn on. Each time [DISPLAY] but-
ton to change as follow all on, test pattern 1, test pattern 2, all
off, all on in this order.
SWAP MODE
The signal will be swap to all channel so that all speaker will have
sound output.
Procedure:
1. While pressing the [MUSIC] and [
?/1
] buttons, press the
[POWER] button to turn on the main power.
2. The message “SWAP MODE” appears (No change while dis-
played).
COMMAND MODE CHANGE MODE
The command mode of the remote-commander which this set re-
ceives can be changed.
Procedure:
1. While pressing the [MUTING] and [MUSIC] buttons, press
the [
?/1
] button to turn on the main power.
2. Either the message “C. MODE AV1” or “C. MODE AV2” ap-
pears. Select the desired mode.
SIRIUS FACTORY TEST MODE
(US, Canadian models only)
Mode to con
fi
rm operation of SIRIUS. Doing display of ID of
SIRIUS antenna and output of audio signal that SIRIUS antenna
generates, it is con
fi
rmed that there are no problems in the commu-
nication of the SIRIUS antenna and the transmission of the audio
signal.
Procedure:
1. The SIRIUS antenna was connected, while pressing the
[DISPLAY] and [2CH/A.DIRECT] buttons, press the [
?/1
]
button to turn on the main power.
2. Whenever the [DISPLAY] button is pressed, the output of the
audio signal of 1 kHz L/R, 20 Hz L/R, 5 kHz L/R, muting, 1
kHz L and 1 kHz R are switched.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
