Sony STR-DA3600ES - Multi Channel Av Receiver, Руководство по эксплуатации

Страница: 44 / 162

44 GB
4
Press V / v repeatedly to select
“Impedance,” then press .
5
Press V / v repeatedly to select
“4 ohms” or “8 ohms”
depending on the speakers you
are using, then press
.
The parameter you have selected is
entered.
6
Press RETURN/EXIT O .
To exit the menu
Press MENU.
Notes
• If you are not sure of the impedances of the
speakers, refer to the operating instructions
supplied with your speakers. (This information is
often on the back of the speaker.)
• When you connect all speakers with a nominal
impedance of 8 ohms or higher, set “Impedance” to
“8 ohms.” When connecting other types of
speakers, set it to “4 ohms.”
• When you connect front speakers to both the
FRONT A and FRONT B terminals, connect the
speakers with a nominal impedance of 8 ohms or
higher.
– When you connect speakers with impedance of
16 ohms or higher in both “ A ” and “ B ”
configuration:
Set “Impedance” to “8 ohms” in the Speaker
settings menu.
– For other types of speakers in other
configurations:
Set “Impedance” to “4 ohms” in the Speaker
settings menu.
Select the speaker pattern according to the
speaker system which you are using.
1
Press MENU.
The menu is displayed on the TV screen.
2
Press V / v repeatedly to select
“ Settings,” then press or
b .
The Settings menu list appears on the TV
screen.
3
Press V / v repeatedly to select
“Speaker,” then press .
4
Press V / v repeatedly to select
“Speaker Pattern,” then press
.
The Speaker Pattern screen appears.
5
Press V / v to select the speaker
pattern you want, then press
.
6
Press RETURN/EXIT O .
Selecting the speaker pattern