Sony STR-DA2000ES - Fm Stereo/fm-am Receiver, Руководство по обслуживанию

Страница: 13 / 158

13
STR-DA2000ES/DB2000
Items Display Remark
Protector on/off PROTECTOR [XXX] XXX: ON or OFF (switching with
[--/+]
dial)
Model version A2B9 **** vX.XX **** : destination,
X.XX: main microprocessor software version
Sub micom version Sub Micom vX.XX X.XX: sub microprocessor software version
Model/Dist change
[A2B9
****
]XXXX
**** : destination, XXXX: auto or fix
(switching with
[--/+]
dial)
FL fonts check FONT 0x ** =[X] ** : 20 to FE, X: character (switching with
[--/+]
dial)
FL display check ALL ON Each time
[DISPLAY]
button to change as follows.
all on
t
test pattern 1
t
test pattern 2
t
all off
t
all on
SWAP control SWAP. XXXXXXXXXXX Switching with
[--/+]
dial
Decoder SI mode change D1 SI= [ ***
]XXXX
*** : DIR or A/D, XXXX: AUTO or FIX
(switching with
[--/+]
dial)
DSP IRAM I[ *****
]=[XXXX]
The umbers which can be changed will blinks
To select the digit: Press the
[]
or
[TUNING --]
button
To select the number when the umbers (XXXX) blinks:
Rotate the
[--/+]
dial
To perform the write when the umbers (XXXX) blinks:
Press the
[MEMORY/ENTER]
button
*****
: address (50000 to 51FFF),
XXXX: data (0000 to FFFF)
DSP IRAM
# ***** =XXXXXXXX The umbers which can be changed will blinks
To select the digit: Press the
[]
or
[TUNING --]
button
To select the A (ARAM) or B (BRAM) when the umbers
(
***** ) blinks: Rotate the
[--/+]
dial
To select the number when the umbers (XXXXXXXX) blinks:
Rotate the
[--/+]
dial
To perform the write when the umbers (XXXXXXXX) blinks:
Press the
[MEMORY/ENTER]
button
#: A or B,
*****
: address (10000 to 21E28),
XXXXXXXX: data (0000 to FFFFFFFF)
Bass management BS.MAN.[ **** ]XX **** : AUTO, OFF or 02 to 29, XX: 00 to 28
(switching with
[--/+]
dial)
DSP boot error DSP BT ERR :XXX XXX: 0 to 255
DSP write 1 error DSP WT1 ERR:XXX XXX: DSP write error (0 to 225)
DSP write 2 error DSP WT2 ERR:XXX XXX: DSP write error (0 to 225)
DSP write 3 error DSP WT3 ERR:XXX XXX: DSP write error (0 to 225)
DSP read 1 error DSP RD1 ERR:XXX XXX: DSP read error (0 to 225)
DSP read 2 error DSP RD2 ERR:XXX XXX: DSP read error (0 to 225)
DSP read 3 error DSP RD3 ERR:XXX XXX: DSP read error (0 to 225)
EEPROM data check EEPROM[ ****
] XX
**** : EEPROM address (0000 to 0FFF),
XX: EEPROM data 00 to FF (switching with
[--/+]
dial)
Super reset SUPER RESET [XXX] Not used for the servicing.
When EEPROM initialization is required, perform the memory
clearing mode (see page 12)
DSP soft version DSP Ver: vXXX XXX: DSP version
DSP HALT DSP HALT [XXX] XXX: ON or OFF (switching with
[--/+]
dial)
E-vol data FL/FR FL **** FR XXXX **** : Front L-ch volume value (0000 to 0FFF),
XXXX: Front R-ch volume value (0000 to 0FFF)
E-vol data SL/SR SL
****
SR XXXX
****
: Surround L-ch volume value (0000 to 0FFF),
XXXX: Surround R-ch volume value (0000 to 0FFF)
E-vol data CT/SW CT **** SW XXXX **** : Center volume value (0000 to 0FFF),
XXXX: Subwoofer volume value (0000 to 0FFF)
E-vol data BL/BR BL **** BR XXXX **** : Surround back L-ch volume value (0000 to 0FFF),
XXXX: Surround back R-ch volume value (0000 to 0FFF)
Sub micom error count Scom error XXX XXX: Communication error time with sub microprocessor
(0 to 225)