CD-RW Recorder User’s Guide
27
26
CD-RW Recorder User’s Guide
• IDE cable and the
CD-RW drive are
not connected
properly.
• Conflicts with
other IDE devices.
• Power is not
switched on.
• Ensure that both
connectors of IDE
cable is properly
connected to the
IDE ports on the
main board and
CD-RW.
• Ensure the
Master/Slave
device setting of
CD-RW if not
conflict with the
other IDE device
connected to the
same IDE port.
• Check if LED of
your CD-RW drive
is lit. If not, there
is no power.
No CD-RW drive
recognition.
• The sound board
isn’t working
properly.
• Connect speakers
to the headphone
jack of your CD-
RW drive while
playing a music
CD. If you hear
sound from the
speakers, the drive
is working fine.
• Ensure that your
CD-RW drive is
correctly linked to
the sound board.
• Check if the (MCI)
CD-Audio driver is
installed.
No sound from
external speaker
when you’re playing
a music CD.
• Improper level
setting in Windows
audio mixer.
• Improper audio
cable connection
between CD-RW
drive and sound
board.
• Check if the
Masters, CD and
Line levels in every
audio mixer are
correct.
• Ensure the audio
cable is properly
connected to the
CD or Line input
of your sound
board.
Low sound level
from CD-RW drive.
Symptom
Possible Causes
Solutions
If you meet any trouble during installation or normal use of your
CD-RW drive, please refer to the following information.
Read Problems
Symptom
Possible Causes
Solutions
