8. Attach the IDE cable
Attach the EIDE cable so that the red line that signifies
Pin 1 of the cable is aligned with Pin 1 on the drive.
Although the cables that Sony includes with the unit
are keyed so that they may only be installed properly,
other cables may not be keyed the same. If you use
your existing cable, please be sure to align it properly.
The red line side of the cable goes to the set of pins
closest to the power connector on the drive.
9. Attach the DC power cable.
Plug your standard power connection to the drive.
DIGITAL
AUDIO
ANALOG
AUDIO
SLAVE
C
S
R G G L
+5 G G +12
0 0
S
L
M
A
39
40
1
2
MASTER
HOST INTERFACE
POWER
CABLE SELECT
10. Connect the audio cable.
If you have a sound card, you can attach the audio
cable to the audio out connectors.
11. Power up system and Install the CD-Recording
software that came with your drive.
12. Restart System.
If there are any difficulties in completing the operations
outlined in this manual, please see the troubleshooting
guide in Chapter 4. You may also contact the Sony
Technical Support Center.
CD-RW Recorder User’s Guide
23
22
CD-RW Recorder User’s Guide
Pin 1
DIGITAL
AUDIO
ANALOG
AUDIO
SLAVE
C
S
R G G L
+5 G G +12
0 0
S
L
M
A
39
40
1
2
MASTER
HOST INTERFACE
POWER
CABLE SELECT
DIGITA
L
AUDIO
ANALO
G
AUDIO
SLAVE
C
S
R G G L
+5 G
G +
12
0 0
S
L
M
A
39
40
1
2
MASTE
R
HOST IN
TERFACE
POWER
CABLE S
ELECT
