128
Operating Instructions
To check the stored number and the name
recorded
1
Press
speed dial
with the receiver placed on the base
phone.
2
Enter one of the speed dialing numbers by
pressing a number button.
The recorded name and the phone number will be
announced.
To change a stored number
Repeat steps 1 to 5. The name recorded for name
announcement will not be erased.
To change the recorded name
Repeat steps 1 to 6. The new name replaces the
previously recorded one.
To erase the recorded name
1
After step 2 in “To check the stored number and
the name recorded”, press
hold/erase
while the
recorded name is being played back.
2
Press
hold/erase
within 5 seconds.
You will hear a confirmation beep.
To erase the stored speed dialing number
1
After step 2 in “To check the stored number and
the name recorded”, press
hold/erase
while the
stored phone number is being played back.
2
Press
hold/erase
within 5 seconds.
You will hear a confirmation beep.
Tips
• If you do not record anything after step 5, an error beep
will be heard, but the speed dialing number is stored.
• Erasing the speed dialing number will erase both the
stored phone number and the recorded name.
To enter a pause between numbers
Press
redial
between the numbers in step 4 above.
A press on the button will create a pause of
approximately 4 seconds. Press the button as many
times as necessary.
Tip
Dialing a PBX (Private Branch Exchange) number may
require a pause between numbers.
Making calls with speed dialing on
the base phone
1 Pick up the receiver and press
on hook
.
Make sure you hear a dial tone.
2 Press
speed dial
.
3 Enter the desired speed dialing number
(
0
–
9
).
The phone number stored in the speed dialing
number will be dialed.
Note
If you enter a number without any speed dialing phone
number, you will hear an error beep.
Using the phone
directory
(handset)
Storing phone numbers in the phone
directory (handset)
You can dial a number by scrolling through the
phone directory, in which up to 10 phone numbers
can be stored.
1 Press
program
when a call is not in
progress.
2 Press
1
or
directory
.
The smallest program number available is
displayed.
3 Press
directory
several times to display the
desired program number.
4 Press
program
.
5 Enter the phone number you wish to
store.
You can enter up to 20 digits. Make sure you
enter the area code first.
6 Press
program
.
A beep will sound for confirmation.
When the directory is full
After step 1, “C42 FULL” will be displayed.
Tips
• If you enter a wrong number in step 5, press
hold/erase
to
erase the number.
• Even if you store the phone number with the area code,
the fee will be the same as that of a local call.
Speed dialing (base phone)
(continued)
