117
Operating Instructions
click
click
click
click
to an AC outlet
(AC 100V)
AC power adaptor
to the telephone line jack
Telephone line cord
to a
telephone
outlet
Receiver cord
Receiver
to DC IN 9V
Cord hook
Telphone line jack
Be sure to insert the
plug firmly.
Route the cord
through the cord
hook to prevent it
from coming off.
Insert the plug until
it snaps in place.
Antenna
Preparations
1
Connecting the base phone
Connect the base phone to the telephone outlet and to an AC outlet.
1 Connect the receiver to the base phone
and place it on the base phone.
2 Connect the telephone line cord to the
base phone and to a telephone outlet.
3 Connect the AC power adaptor to the DC
IN 9V jack and to an AC outlet (AC 100V).
4 Raise the antenna. Make sure it points
towards the ceiling.
After you connect the AC power adaptor, the unit
starts initializing the built-in answering machine.
Wait for approximately 30 seconds until a beep is
heard and all the lamps start flashing before you
start setting the date and time.
Notes
• Insert the receiver cord and the telephone line cord until
the plugs snap in place.
• Place the base phone and the handset more than 1 meter
away from each other.
• Do not bundle the telephone line cord or the AC power
adaptor cord. If you do, interference noise may be
heard.
(continued)