Sony SPP-A985 - Cordless Telephone With Answering System Скачать руководство пользователя

Страница: 51 / 80

Answering Machine Features

Answering Machine Features

Turning on the answering function

Press

(ANSWER ON/OFF)

on the

base phone.
The ANSWER ON/OFF button
lights up.

Mailbox usage

This phone offers you three voice mailboxes, providing a convenient
way to share the mailbox feature with other members of your
household or business.

When a caller calls

The caller can choose one of the two ways to leave a message:

• If calling from a touch-tone phone, the caller select a mailbox by

pressing

(*)(1)

(MAILBOX 1),

(*)(2)

(MAILBOX 2) or

(*)(3)

(MAILBOX 3) while the caller hears the greeting. The greeting stops
and a beep will sound, then the caller can start recording a message

• Wait until the greeting finishes, then start recording a message.

When the caller does not select a mailbox, the message is
automatically recorded to MAILBOX 1.

Notes

• If four minutes have passed while recording the incoming message, the line

will be disconnected automatically.

• If the message is shorter than two seconds, it will not be recorded.

To turn off the answering function

Press

(ANSWER ON/OFF)

on the base phone.

The ANSWER ON/OFF button goes off.

Message counter

continued

(ANSWER ON/OFF)

Содержание SPP-A985 - Cordless Telephone With Answering System

















































































Результаты поиска

Содержание SPP-A985 - Cordless Telephone With Answering System

Отзывы:

Похожие инструкции для SPP-A985 - Cordless Telephone With Answering System

Бренды по названию

Популярные бренды

Sony SPP-A985 - Cordless Telephone With Answering System, Руководство по эксплуатации

Результаты поиска

Содержание SPP-A985 - Cordless Telephone With Answering System

Отзывы:

Похожие инструкции для SPP-A985 - Cordless Telephone With Answering System

Бренды по названию

Популярные бренды