Sony SPP-A985 - Cordless Telephone With Answering System Скачать руководство пользователя

Страница: 72 / 80

Additional Information

Symptom

You hear five short error
beeps when you press

(TALK)

You hear no dial tone.

The phone does not connect at
all, even though the number
you dial is correct.

The phone does not redial
correctly.

You hear five short error beeps
when you try to redial.

You cannot perform the redial
operations (redialing, checking
and erasing the phone
number), and “CHANNEL
SEARCHING” appears on the
display.

You cannot hear anything from
the speakerphone.

The handset does not ring.

The base phone does not ring.

Remedy

• Make sure you have set up the base phone correctly

(page 10).

• Move the handset closer to the base phone.

• Make sure the telephone line cord is securely

connected to the telephone outlet.

• Make sure the battery is fully charged (page 13).

• Make sure the dialing mode is set correctly (page 12).

• Make sure the last dialed number is really the one you

want to dial.

• The number you last dialed exceeds 32 digits

(including the tone and pause digits if used).

• The number you last dialed is erased.

• Move the handset closer to the base phone and

perform the redial operations again.

• Press

(VOL)

(+)

on the base phone to increase the

speaker volume.

• Make sure the ringer is turned on (page 40).
• The battery may be weak. Charge the battery for more

than 12 hours (page 13).

• Make sure you have set up the base phone correctly

(page 10).

• Move the handset closer to the base phone.

• Set the RINGER LEVEL switch on the base phone to

HIGH or LOW.

• Make sure the telephone line cord is securely

connected to the telephone outlet.

Troubleshooting

If you’ve experienced any of the following difficulties while using your
phone, use this troubleshooting guide to help you remedy the problem.
Should any problem persist, consult your nearest Sony dealer.

Making calls

Receiving calls

Содержание SPP-A985 - Cordless Telephone With Answering System

















































































Результаты поиска

Содержание SPP-A985 - Cordless Telephone With Answering System

Отзывы:

Похожие инструкции для SPP-A985 - Cordless Telephone With Answering System

Бренды по названию

Популярные бренды

Sony SPP-A985 - Cordless Telephone With Answering System, Руководство по эксплуатации

Результаты поиска

Содержание SPP-A985 - Cordless Telephone With Answering System

Отзывы:

Похожие инструкции для SPP-A985 - Cordless Telephone With Answering System

Бренды по названию

Популярные бренды