A
d
mini
s
tra
ting
t
he
Came
ra
Sending a mail — e-Mail (SMTP) setting Menu
31
Note
You can access the camera even from a computer having
an IP address whose access right is set to
Deny
, if you
enter the user name and password set for the
Administrator boxes in the User setting menu.
OK/Cancel
See “Buttons common to every setting menu” on page
19.
Sending a mail
(SMTP) setting Menu
When you click
SMTP
on the Administrator menu, the
SMTP setting menu appears.
By using Mail (SMTP) function, you can send a mail of
an alarm message by synchronizing with the built-in
motion detection function. The image file can also be
sent periodically.
e-Mail (SMTP) setting menu is composed of two tabs:
Setting
and
Send trigger
.
Setting Tab — Setting the SMTP
Function
e-Mail (SMTP)
Select
On
when you use the e-Mail (SMTP) function.
The common setting options are displayed below.
If you do not wish to use the e-Mail (SMTP) function,
select
Off
and click
OK
.
Notes
• During transmission of an image file via mail, the
frame rate and operation performance of the monitor
image of the main viewer decline.
• You cannot send an audio file by using the mail
sending function.
SMTP server name
Type the SMTP server name up to 64 characters, or the
IP address of the SMTP server.
Authentication
Select the authentication required when you send an e-
mail.
None:
Select if no authentication is necessary when an
e-mail is sent.
SMTP authentication:
Select if authentication is
necessary when an e-Mail is sent.
