A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Camera Image and Audio — Camera setting Menu
24
Setting the Camera
Image and Audio
— Camera setting Menu
When you click
Camera
on the Administrator menu,
the Camera setting menu appears.
Use this menu to set the functions of the camera.
The Camera setting menu consists of five tabs:
Common
,
MPEG4
,
JPEG, Pan/Tilt
and
Reset
.
Common Tab
Video mode
Select the output format of the camera image.
MPEG4
or
JPEG
can be selected.
Image size
You can select the image size sent from the network
camera.
640 × 480 (VGA)
,
320 × 240 (QVGA)
, or
160 × 120
(QQVGA)
can be selected.
Cropping
When the image size is set to
640 × 480 (VGA)
, you can
crop a portion of the image and display the cropped
image on the computer. With the cropping, the
transmitting data size, and thus, the network load is
reduced and a higher frame rate is obtained.
Select
On
for cropping the image, or
Off
for no
cropping.
Note
When Cropping is set to
On
, Motion detection function
does not work.
To crop an image
1
Set the
Image size
to
640 × 480(VGA)
.
The
Cropping
is displayed.
2
Set the
Cropping
to
On
and click the
Area setting
button.
The cropping area frame in the “Area setting”
display appears.
3
Specify the cropping area.
Click and drag the cropping area frame to move it
or change the size of it. The frame indicates the
cropping area.
4
Click
OK
at the bottom of the window.
The cropped image is displayed on the main viewer.
5
To close the image, click
in the upper-right
corner.
Flickerless mode
If the image is flickering by the fluorescent light, select
On
to reduce it.
Note
This mode is available only for CE model.
Sharpness
Select the sharpness in 7 steps, from
–3
to
3
.
Selecting
3
gives the image with the highest sharpness.
Microphone
Select whether you send the audio from the built-in
microphone or from the
m
microphone input connector.
Select
On
to send the audio from this network camera.
Cropping area frame
