Sony SLV-LX500 Скачать руководство пользователя страница 5

Страница: 5 / 45

1-1

1. GENERAL

SLV-LX500/LX600S/LX700S

This section is extracted from instruction manual.
(3-081-607-E1)

Unpacking

Getting Started

Step 1 : Unpacking

Check that you have received the following items with the VCR:

• Remote commander

• 75-ohm coaxial cable with F-type connectors

• Size AA (R6) batteries

• Audio/video cable (3-phono to 3-phono)

(SLV-LX700S and SLV-LX600S only)

• Plug adaptor (SLV-LX700S CS only)

If the plug supplied with your VCR does not fit
your power outlet, attach the supplied adaptor
to the plug.

Check your model name

The instructions in this manual are for the 4 models: SLV-LX700S MX/CS, SLV-LX600S
MX and SLV-LX500 MX. Check your model name by looking at the rear panel of your
VCR.
SLV-LX700S MX is the model used for illustration purposes. Any difference in operation
is clearly indicated in the text, for example, “SLV-LX700S MX only.”

Getti

ng Sta

rted

Setting up the remote commander

Step 2 : Setting up the remote commander

Notes

• With normal use, the batteries should last about three to six months.

• If you do not use the remote commander for an extended period of time, remove the batteries

to avoid possible damage from battery leakage.

• Do not use a new battery with an old one.
• Do not use different types of batteries.

Inserting the batteries

Insert two size AA (R6) batteries
by matching the + and – on the
batteries to the diagram inside the
battery compartment.

Insert the negative (–) end first,
then push in and down until the
positive (+) end clicks into
position.

Using the remote
commander

You can use this remote
commander to operate this VCR
and a Sony TV. Buttons on the
remote commander marked with a
dot (•) can be used to operate your
Sony TV.

If the TV does not have the

symbol near the remote sensor, this
remote commander will not
operate the TV.

To operate

Set •TV / VIDEO to

the VCR

VIDEO and point at the remote sensor at the VCR

a Sony TV

•TV and point at the remote sensor at the TV

•

TV / VIDEO

Remote sensor

continued

Setting up the remote commander

Controlling other TVs with the remote commander
(not available on SLV-LX500)

The remote commander is preprogramed to control non-Sony TVs. If your TV is
listed in the following table, set the appropriate manufacturer’s code number.

Now you can use the

, VOL (volumen) +/–, CH (canal) +/–, and TV/VIDEO

buttons to control your TV. You can also use the buttons marked with a dot (•) to
control a Sony TV. To control the VCR, reset •TV / VIDEO to VIDEO.

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find
the one that works with your TV.

Set •TV / VIDEO at the top of the remote commander to •TV.

Hold down

, and enter your TV’s code number using the number buttons.

Then release

Gold Star

03, 04, 17

Hitachi

02, 03

J.C.Penney

04, 12

JVC

KMC

Magnavox

03, 08, 12

Marantz

04, 13

MGA/Mitsubishi

04, 12, 13, 17

NEC

04, 12

Panasonic

06, 19

Philco

03, 04

Philips

Pioneer

Portland

Quasar

06, 18

Radio Shack

05, 14

RCA

04, 10

Sampo

Sanyo

Scott

Sears

07, 10, 11

Sharp

03, 05, 18

Sylvania

08, 12

Teknika

03, 08, 14

Toshiba

Wards

03, 04, 12

Yorx

Zenith

TV brand

Code number

Getti

ng Sta

rted

Setting up the remote commander

Notes

• If you enter a new code number, the code number previously entered will be erased.
• If the TV uses a different remote control system from the one programed to work with the

VCR, you cannot control your TV with the remote commander.

• When you replace the batteries of the remote commander, the code number may change. Set

the appropriate code number every time you replace the batteries.

• When you press the AUDIO MONITOR (monitor de audio) button, your TV’s menu may

appear on the TV screen. To exit the TV menu, press the MENU button on the TV remote
commander or wait until the menu disappears automatically.

www. xiaoyu163. com

QQ 376315150

TEL 13942296513