1-11
44
Searching using various functions
To search for the counter 0:00:00 point
To mark a point on the tape that you want to find later, reset the tape counter to
“0:00:00.”
The VCR automatically fast-forwards or rewinds to the 0:00:00 point on the tape
counter.
To search for a blank portion of the tape
The VCR automatically searches for the beginning of a blank portion. You can easily
find a point you can start recording from.
Note
• Once in recording mode, if the VCR is put in pause and then released to start the recording,
no index mark will be inserted. An index mark will be inserted if the channel is changed
while VCR is put in pause.
1
Press SEARCH (búsqueda).
2
Press
M
.
The VCR starts searching and automatically
stops at the 0:00:00 point.
1
Press SEARCH (búsqueda).
2
Press
m
.
The VCR starts searching and automatically
stops at the beginning of a blank space. If no
blank space is found, the VCR reaches the end
and the tape will be ejected.
:
:
0 0 1 3 0 SP
Vaya a [
]
0 0 0
:
0 0
:
:
:
0 0 1 3 0 SP
Búsqueda del fin
45
Adjusting the picture (tracking)
Ad
di
tiona
l O
p
era
tions
Adjusting the picture (tracking)
Although the VCR automatically adjusts the tracking
when playing a tape, distortion may occur if the
recording is in poor condition. In this case, manually
adjust the tracking.
Press TRACKING (seguimiento) +/– on the VCR to
display the tracking meter. The distortion should
disappear as you press one of the two tracking
buttons. To resume automatic tracking adjustment,
eject the tape and reinsert it.
Note
• The auto tracking adjustment cannot be guaranteed to work with tapes recorded in the LP
mode on other VCRs.
SEGUIMIENTO
Tracking meter
46
Changing menu options
Changing menu options
Initial settings are indicated in bold print.
1
Press MENU.
2
Press
M
/
m
to move the cursor (
B
) to
“Opciones
Avanzadas,” then press OK (aceptación).
3
Press
M
/
m
to move the cursor (
B
) to the option to change.
to change the setting, then press OK (aceptación).
Set this option to
when using a T-120 or shorter length tape.
• T-160 when using a T-160 length tape.
• T-180 when using a T-180 or longer length tape.
For details, see page 27.
to start playback automatically, when you insert a tape with
its safety tab removed.
• NO to turn off Auto play. You need to press
H
PLAY
(reproducción) to start playback, even if you insert a tape with
its safety tab removed.
• SI to play back a tape repeatedly. The VCR rewinds a tape to
the beginning and restarts playback automatically.
•
NO
to turn off Auto repeat.
Auto-apagado
• 1h to turn off the VCR automatically one hour after the last
operation.
• 2h to turn off the VCR automatically two hours after the last
operation.
•
NO
to set no specific time to turn off.
Ahorro energía
• SI to turn off the indicators in the display window during
standby mode to reduce the VCR’s power consumption to a
minimum.
•
NO
to turn on the indicators in the display window while the
VCR is standing by.
Salida video
•
3CH
(canal3) when using channel 3 to receive the VCR signal.
• 4CH (canal4) when using channel 4 to receive the VCR signal.
For details, see page 47
:
:
OPCIONES AVANZADAS
OK
Vv
:
Bb
Auto-reproducción:
Selc. de cinta:
Auto-repetición:
SI
T1 2 0
NO
[
[
[
]
]
]
Auto-apagado:
NO
[
]
Ahorro energía:
NO
[
]
: MENU
Escoger
Fin
Ajustar
Salir
Salida video:
]
[ 3CH
47
Changing menu options
Ad
di
tiona
l O
p
era
tions
Setting the RF Output channel
When connecting the VCR to the TV using
only the antenna cable, you must set the
“Salida video” in the OPCIONES
AVANZADAS menu so that the TV can
receive the correct signal from the VCR.
1
Set the “Salida video” to “3CH (canal3)” or “4CH (canal4)” in the OPCIONES
AVANZADAS menu, whichever channel is not used in your area. If both are
used, set the “Salida video” to either channel.
2
Press
?
/
1
POWER (alimentación) to turn on the VCR.
3
Press TV/VIDEO to turn on the VIDEO indicator in the VCR’s display window.
4
Press CHANNEL (canal) +/– to display a channel number in the display window.
Select an active channel number in your area.
5
Turn on your TV and set it to the channel you selected in step 1 (channel 3 or 4).
The channel you selected in step 4 appears on the TV screen. If the channels
change when you press CHANNEL (canal) +/–, you have made the correct
setting.
Whenever you use the VCR, set the TV to the channel selected in step 1.
TV
CHANNEL (canal) +/–
?
/
1
POWER
(alimentación)
1
2
3
4
5
6
7
8
9
0
TV/VIDEO
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299