42
US
SHAKE-X30/SHAKE-X10.US.4-691-057-
12
(1)
The remote control does not
function.
•
•
Remove the obstacles between
the remote control and the unit.
•
•
Move the remote control closer to
the unit.
•
•
Point the remote control at the
unit’s sensor (page 17).
•
•
Replace the batteries (R03/size
AAA).
•
•
Move the unit away from the
fluorescent light.
There is acoustic feedback.
•
•
Reduce the volume.
•
•
Move the microphone and guitar
away from the system or change
the direction of the microphone.
“PLEASE CONNECT ALL SPK”
appears.
•
•
Check that all speakers are
connected.
“CHILD LOCK” appears when you
press any button on the unit.
•
•
Set the Child Lock function to off
(page 39).
A clicking sound is heard when
turning the power on.
•
•
This is the operating sound and it
occurs when the power is turned
on or off, for example. This is not a
malfunction.
Speakers
Sound comes from only one
channel or the left and right
volume is unbalanced.
•
•
Place the speakers as
symmetrically as possible.
•
•
Check that the speakers are
connected securely and correctly.
•
•
The source being played back is
monaural.
There is no sound from a specific
speaker.
•
•
Check that the speaker is
connected securely and correctly.
Disc player
The disc tray does not open and
“LOCKED” appears on the display.
•
•
Consult your nearest Sony dealer
or local authorized Sony service
facility.
The disc tray does not close.
•
•
Load the disc correctly.
The disc does not eject.
•
•
You cannot eject the disc during
Synchronized Transfer or REC1
Transfer. Press
to cancel the
transfer, then press
on the unit
to eject the disc.
•
•
Consult your nearest Sony dealer.
Playback does not start.
•
•
Wipe the disc clean (page 47).
•
•
Reload the disc.
•
•
Load the disc that this system can
play back (page 8).
•
•
Remove the disc and wipe away
the moisture on the disc, then
leave the system turned on for
a few hours until the moisture
evaporates.
The sound skips.
•
•
Wipe the disc clean (page 47).
•
•
Reload the disc.
•
•
Move the unit to a place with no
vibration.
•
•
Move the speakers away from the
unit. When you listen to a track
with bass sounds at high volume,
the speaker vibration may cause
the sound to skip.
