background image

4

US

SHAKE-X30/SHAKE-X10.US.4-691-057-

12

(1)

CAUTION

You are cautioned that any changes or 
modifications not expressly approved 
in this manual could void your 
authority to operate this equipment.
Properly shielded and grounded 
cables and connectors must be used 
for connection to host computers  
and/or peripherals in order to meet 
FCC emission limits.
This equipment must not be  
co-located or operated in conjunction 
with any other antenna or transmitter.
This equipment complies with FCC 
radiation exposure limits set forth 
for an uncontrolled environment and 
meets the FCC radio frequency (RF) 
Exposure Guidelines. This equipment 
should be installed and operated 
keeping the radiator at least 20 cm or 
more away from person’s body.

For the customers in Canada

Properly shielded and grounded 
cables and connectors must be used 
for connection to host computers  
and/or peripherals.
This device complies with Industry 
Canada’s licence-exempt RSSs. 
Operation is subject to the following 
two conditions: 
(1) This device may not cause 
interference; and 
(2) This device must accept any 
interference, including interference 
that may cause undesired operation of 
the device.
This equipment complies with IC 
radiation exposure limits set forth 
for an uncontrolled environment 
and meets RSS-102 of the IC radio 
frequency (RF) Exposure rules. This 
equipment should be installed and 
operated keeping the radiator at least 
20 cm or more away from person’s 
body.

License and Trademark Notice

 

• “CD” logo is trademark.

 

• WALKMAN® and WALKMAN® logo 

are registered trademarks of Sony 
Corporation.

 

• MPEG Layer-3 audio coding 

technology and patents licensed 
from Fraunhofer IIS and Thomson.

 

• Windows Media is either a 

registered trademark or trademark 
of Microsoft Corporation in 
the United States and/or other 
countries.

 

• This product is protected by 

certain intellectual property rights 
of Microsoft Corporation. Use or 
distribution of such technology 
outside of this product is prohibited 
without a license from Microsoft or 
an authorized Microsoft subsidiary.

 

• LDAC™ and LDAC logo are 

trademarks of Sony Corporation.

 

• The BLUETOOTH® word mark and 

logos are registered trademarks 
owned by Bluetooth SIG, Inc. and 
any use of such marks by Sony 
Corporation is under license. Other 
trademarks and trade names are 
those of their respective owners.

 

• The N-Mark is a trademark or 

registered trademark of NFC Forum, 
Inc. in the United States and in other 
countries.

 

• Android™ is a trademark of Google 

Inc.

 

• Google Play is a trademark of 

Google Inc.

 

• Apple, iPhone, iPod, and iPod 

touch are trademarks of Apple Inc., 
registered in the U.S. and other 
countries. App Store is a service 
mark of Apple Inc., registered in the 
U.S. and other countries.

Содержание SHAKE-X10




















































Отзывы: