39
US
Other Oper
ations
SHAKE-X30/SHAKE-X10.US.4-691-057-
12
(1)
Enjoying music with the
Party Light and Speaker
Light
1
Press PARTY LIGHT repeatedly
to select “LED ON”.
2
Press LIGHT MODE repeatedly to
select the illumination mode
you want.
To turn off Party Light and
Speaker Light
Press PARTY LIGHT repeatedly to
select “LED OFF”.
Note
•
•
Do not look directly at the light-emitting
part when the Party Light and Speaker
Light are turned on.
•
•
If the illumination brightness is glaring,
switch on the room lights or turn off the
illumination.
•
•
You can turn on or off the Party Light
and Speaker Light when demonstration
is turned on.
Using the Sleep Timer
The system turns off automatically
after the preset time.
Press SLEEP repeatedly to select
the time you want.
To cancel Sleep Timer, press SLEEP
repeatedly to select “OFF”.
Hint
To check the remaining time before the
system turns off, press SLEEP.
Using optional
equipment
1
Press VOL – repeatedly until
“VOLUME MIN” appears on the
display.
2
Connect an optional equipment
(page 15).
3
Press FUNCTION repeatedly to
select “AUDIO IN”.
4
Start playing the connected
equipment.
5
Press VOL + repeatedly to adjust
the volume.
Note
The system may enter standby mode
automatically if the volume level of the
connected equipment is too low. Adjust
the volume level of the equipment.
To turn off automatic standby function,
see “Setting the automatic standby
function” (page 40).
Deactivating the
buttons on the unit
(Child Lock)
You can deactivate the buttons
(except
) on the unit to prevent
misoperation, such as child mischief.
Hold down
on the unit for more
than 5 seconds.
“CHILD LOCK ON” appears on the
display.
