![background image](http://html.mh-extra.com/html/sony/shake-6d/shake-6d_operating-instructions-manual_1330190049.webp)
model name [SHAKE-6D]
[4-462-817-
11
(2)] GB
49
GB
filename[D:\NORM'S JOB\SONY HA\SO130043\SHAKE-6D (PMRF
01)\4462817112_GB\090INF.fm]
masterpage:Right
Ad
di
tio
n
a
l In
fo
rm
at
io
n
• The DVD VIDEO prohibits changing
the language for the sound track.
The subtitles language cannot be
changed.
• Multilingual subtitles are not recorded
on the DVD VIDEO being played back.
• The DVD VIDEO prohibits changing
the subtitles.
The subtitles cannot be turned off.
• The DVD VIDEO prohibits turning off
subtitles.
The angles cannot be changed.
• Multi-angles are not recorded on the
DVD VIDEO being played back.
• The DVD VIDEO prohibits changing
the angles.
Tuner
Severe hum or noise, or stations
cannot be received. (“TUNED” or
“ST” flashes in the display panel.)
• Connect the antenna properly.
• Change antenna location and its
orientation to obtain good reception.
• Connect a commercially available
external antenna.
• Consult your nearest Sony dealer if the
supplied AM antenna has come off from
the plastic stand.
• Turn off surrounding electrical
equipment.
Bluetooth
device
Pairing cannot be done.
• Move the
Bluetooth
device closer to the
system.
• Pairing may not be possible if other
Bluetooth
devices are present around the
system. In this case, turn off the other
Bluetooth
devices.
• Make sure the correct passkey was
entered at the
Bluetooth
device.
Connection is not possible.
• The
Bluetooth
device you attempted to
connect does not support the A2DP
profile, and cannot be connected with
the system.
• Enable the
Bluetooth
function of the
Bluetooth
device.
• Establish a connection from the
Bluetooth
device.
• The pairing registration information has
been erased. Perform the pairing
operation again.
• While connected to a
Bluetooth
device,
this system cannot be detected and a
connection cannot be established from
another
Bluetooth
device which is never
paired before.
• Erase the pairing registration
information of the
Bluetooth
device
(page 38) and perform the pairing
operation again (page 35).
The sound skips or fluctuates, or the
connection is lost.
• The system and the
Bluetooth
device are
too far apart.
• If there are obstacles between the
system and your
Bluetooth
device,
remove or avoid the obstacles.
• If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other
Bluetooth
device,
or a microwave oven nearby, move
them away.
The sound of your
Bluetooth
device
cannot be heard on this system.
• Increase the volume on your
Bluetooth
device first, and then adjust the volume
using VOL +/–.
There is severe hum, noise, or
distorted sound.
• If there are obstacles between the
system and your
Bluetooth
device,
remove or avoid the obstacles.