![background image](http://html.mh-extra.com/html/sony/shake-6d/shake-6d_operating-instructions-manual_1330190043.webp)
model name [SHAKE-6D]
[4-462-817-
11
(2)] GB
43
GB
filename[D:\NORM'S JOB\SONY HA\SO130043\SHAKE-6D (PMRF
01)\4462817112_GB\080SND.fm]
masterpage:Right
Ot
he
r Op
er
a
tio
ns
To check the timer setting or
activate the timer again
1
Press TIMER MENU.
“TIMER SELECT” flashes in the
display panel.
2
Press .
3
Press
/
repeatedly to select
“PLAY SELECT” or “REC
SELECT”, then press
.
To cancel the timer
Repeat the same procedure as above and
select “TIMER OFF” in step 3, and then
press .
Notes
• The system turns on before the preset time. If
the system is turned on at the preset time or if
“STANDBY” flashes in the display panel, the
Play Timer and the Recording Timer will not
play or transfer.
• Do not operate the system from the time the
system turns on until the playback or transfer
starts.
Changing the display
Press DISPLAY repeatedly while
the system is turned off.
Demonstration
The display changes and the indicator
flashes even when the system is turned
off.
No display (Power Saving Mode)
The display is turned off to conserve
power. The timer and clock continue to
operate.
Clock
The clock display automatically turns to
Power Saving Mode after a few seconds.
1
Hold down SHIFT, then press
OPTIONS.
2
Press
/
repeatedly to select
“SPECTRUM”, then press
.
3
Press
/
repeatedly to select
the spectrum pattern you want,
then press
.
To exit the options menu, hold down
SHIFT, then press OPTIONS.
Using optional
equipment
1
Press VOL – repeatedly until
“VOLUME MIN” appears in the
display panel.
2
Connect an optional equipment
(page 15).
3
Press FUNCTION repeatedly to
select the function which
corresponds to the connected
equipment.
4
Start playing the connected
equipment.
5
Press VOL + repeatedly to adjust
the volume.
Changing the display mode
Changing the spectrum
pattern of the display panel