SEL2470GM (FE 2.8 / 24-70 GM) (FE 24-70mm F2.8 GM)
4-8
5. Rotate the zoom ring to WIDE end once.
6. Rotate the zoom ring to TELE direction so that the adjustment value on the under left of the window is within the displayed setting value(hexadecimal)
in the [ ].
• The bar and numerical value(hexadecimal) on the window of lower is displayed in conjunction with the movement of the zoom ring.
• The green line which becomes the aim of the set point is displayed on the window of lower.
• Tolerance of setting value is ±2.
• When the adjustment value on the left lower window is reached to the tolerance of setting value, background color of adjustment value is changed
to blue.
Note:
When operating the zoom ring, operate it slowly so that the adjustment value on the left lower window does not exceed the +side tolerance of setting value.
If it eside tolerance of setting value, the value returns to tolerance, it becomes error.
Fig.
4-3-19
7. Push the ENTER key.
8. Repeat above steps 6 and 7 until “POS8”.
Fig.
4-3-20
9. After automatic adjustment is completed normally, “Please adjust after TELE move.ZOOM-POS9” is displayed.
10. Rotate the zoom ring to TELE end once.
11. Rotate the zoom ring to WIDE direction so that the adjustment value on the under left of the window is within the displayed setting value(hexadecimal)
in the [ ].
• The bar and numerical value(hexadecimal) on the window of lower is displayed in conjunction with the movement of the zoom ring.
• The green line which becomes the aim of the set point is displayed on the window of lower.
• Tolerance of setting value is ±2.
• When the adjustment value on the left lower window is reached to the tolerance of setting value, background color of adjustment value is changed
to blue.
Note:
When operating the zoom ring, operate it slowly so that the adjustment value on the left lower window does not exceed the +side tolerance of setting value.
If it eside tolerance of setting value, the value returns to tolerance, it becomes error.
Fig.
4-3-21
12. Push the ENTER key.
13. Repeat above steps 11 and 12 until “POS15”.
Fig.
4-3-22
