SEL2470GM (FE 2.8 / 24-70 GM) (FE 24-70mm F2.8 GM)
4-5
(2) Finishing the E-Mount Lens Adjustment
1. Click the [Disconnect] button and check that the connection status becomes “Disconnect”.
Fig.
4-3-3
2. Click the [×] button on the upper right of the main window to finish.
3. Turn off the power of camera.
4-3-2. E-Mount Lens Adjustment
Note:
If the “PUSH ENTER” does not disappear even after pressing the ENTER key, press it again.
Do not touch the focus ring when performing operations on lens side, as the focus is on
∞
status during adjustment.
(1) Method of Adjustment
1. Start the E-Mount Lens Adjustment.
2. Click the button for corresponding adjustment item in the Adjustment and Inspection.
3. Perform the adjustment according to the instruction on the adjustment screen.
Note:
For the adjustment method of “Flange Back (S)” that require operations on lens side, see the following sections.
4. “FINISHED” appears on the pop-up window when the adjustment is complete, then click the [OK] button.
Fig.
4-3-4
* The adjustment result is displayed on the Message History window.
* Click the [Clear] button, the histories displayed on the Message History window will be deleted.
Fig.
4-3-5
(2) Adjustment method of “Lens Device(S)”
About “Lens Device(S)” item, the operation of lens side is needed.
Note:
Be sure to move the zoom to TELE end, start the adjustments.
When operating the lens, operate it while holding a camera body by hand well.
So that a lens does not work. And never touch the focus ring.
1. Click the [Lens Device(S)] button to display he START screen.
After completing the preparation of adjustments, push the ENTER key.
Fig.
4-3-6
