Sony SEL1224G Скачать руководство пользователя страница 62

Страница: 62 / 70

5-23

SEL1224G

5-5. E-MOUNT LENS ADJUSTMENT

Equipment and Tools

•  Personal Computer (See Note)
•  HASP key (SeusEX)
• USB cable
•  Lens adjustment program (E-Mount Lens Adjustment.zip)
•  Flange back adjustment jig
•  FB adjustment chart (10 mm)
• Camera (NEX-5)

Note:

Personal computer must have the condition that Windows 7 runs
normally and USB is connectable.

5-5-1. Preparations

Set the equipment and the lens to be tested as shown below.

Flange back
adjustment jig

Within 10 mm

Lens to be tested

Camera

Tripod

Lens to
be tested

AC adaptor

Flange back
adjustment jig

FB Adjustment

chart

To tripod

screw

Personal computer

USB cable

HASP key

To USB

connector

To USB

connector

(1) Installation

For adjustment of the SEL1224G, prepare a version 1.4.2.4 or higher
of the lens adjustment program (E-Mount Lens Adjustment.zip).

Note:

Perform the installation by administrator privileges.

Do not change the installation folder.

Procedure of Installation

1. Download the lens adjustment program (E-Mount Lens Adjust-

ment.zip).

2. Double click the setup.exe file.

3. The installer screen appears, then click the [Next] button.

4. The folder select screen appears, then select the installing user

and click the [Next] button.

Everyone: The application will be installed for all users.

Just

me:

The application will only be installed for the current user.

– Continued on next page –

Содержание SEL1224G







































































Результаты поиска

Содержание SEL1224G

Отзывы:

Sony SEL1224G, Руководство по обслуживанию, Страница: 62 / 70

Результаты поиска

Содержание SEL1224G

Отзывы: