Sony SDM-HS74, Руководство по эксплуатации

Страница: 21 / 21

21
GB
Specifications
SDM-HS74/SDM-HS74P
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 17.0 inch
Input signal format RGB operating frequency*
Horizontal: 28 – 80 kHz (analog RGB)
28 – 64 kHz (digital RGB)
Vertical: 48 – 75 Hz (analog RGB)
60 Hz (digital RGB)
Resolution Horizontal: Max.1280 dots
Vertical: Max.1024 lines
Input signal levels Analog RGB video signal
0.7 Vp-p, 75
Ω
, positive
SYNC signal
TTL level, 2.2 k
Ω
,
positive or negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75
Ω
, negative
(Sync on green)
Digital RGB (DVI) signal: TMDS
(Single link)
Power requirements 100 – 240 V, 50 – 60 Hz,
Max. 1.0 A
Power consumption Max. 45 W
Operating temperature 5 – 35
°
C
Dimensions (width/height/depth)
Display (upright):
Approx. 441
×
404
×
216 mm
(17
3
/
8
×
16
×
8
5
/
8
inches)
Mass Approx. 5.7 kg (12 lb. 9 oz.)
Plug & Play DDC2B
Accessories See page 7.
SDM-HS94/SDM-HS94P
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 19.0 inch
Input signal format RGB operating frequency*
Horizontal: 28 – 80 kHz (analog RGB)
28 – 64 kHz (digital RGB)
Vertical: 48 – 75 Hz (analog RGB)
60 Hz (digital RGB)
Resolution Horizontal: Max.1280 dots
Vertical: Max.1024 lines
Input signal levels Analog RGB video signal
0.7 Vp-p, 75
Ω
, positive
SYNC signal
TTL level, 2.2 k
Ω
,
positive or negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75
Ω
, negative
(Sync on green)
Digital RGB (DVI) signal: TMDS
(Single link)
Power requirements 100 – 240 V, 50 – 60 Hz,
Max. 1.0 A
Power consumption Max. 50 W
Operating temperature 5 – 35
°
C
Dimensions (width/height/depth)
Display (upright):
Approx. 480
×
440
×
260 mm
(19
×
17
3
/
8
×
10
1
/
4
inches)
Mass Approx. 6.9 kg (15 lb. 3
3
/
8
oz.)
Plug & Play DDC2B
Accessories See page 7.
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.