Sony RMT-V267B, Руководство по обслуживанию

Страница: 9 / 91

1-4
Basic Operations
16
Setting the timer manually (continued)
Channel number Station ID
2
Move the cursor stick
M
/
m
to select the line that is to be set.
3
Set the date, start and stop time, channel
number and tape speed:
1 Move the cursor stick
,
to highlight
each item in turn.
2 Move the cursor stick
M
/
m
to set each
item.
To correct a setting, move the cursor stick
<
to return to that setting and reset.
When you set the channel number, the
station ID appears on the TV screen. You
can set it while checking the station ID.
To record the same program every day or
the same day every week, move the cursor
stick
m
while the date is highlighting. For
details, see “Daily/weekly recording”
below.
To record from a source connected to the LINE-1 IN or LINE-2 IN
jacks, press INPUT SELECT to display “LINE1” or “LINE2” in the
“CH” position.
4
Move the cursor stick
,
to confirm the setting.
The cursor appears at the beginning of the line. To enter another
setting, select the next line and repeat step 3.
5
Push the cursor stick (OK).
9
TIMER SET / CHECK
3
TUE 9 / 28
DATE START STOP CH
/ – : – – – : – – – – SP
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
THU 0
9
TIMER SET / CHECK
3
TUE 9 / 28
DATE START STOP IJK
/ 7 : 0 0 8 : 0 0 1 2 SP
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
THU 0 AM AM
INPUT
SELECT
• CURSOR
PUSH OK
• CURSOR
PUSH OK
• CURSOR
PUSH OK
• CURSOR
PUSH OK
17
Basic Operations
Basic Operations
6
Press
`/1
to turn off the VCR.
The indicator appears in the display window and the VCR stands
by for recording. When using a cable box, leave it on.
To stop recording
To stop the VCR while recording, press
x
STOP.
Daily/weekly recording
In step 3 above, move the cursor stick
m
to select the recording pattern. Each
time you move the cursor stick
m
, the indication changes as shown below.
Move the cursor stick
M
to change the indication in reverse order.
the current date
t
SUN-SAT
t
MON-SAT
t
MON-FRI
t
EVERY SAT
t
.....
t
EVERY MON
t
EVERY SUN
t
1 month later
t
(date counts down)
t
the current date
To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press
`/1
. The
indicator disappears from the display window and the VCR switches on.
Remember to press
`/1
to reset the VCR to the timer recording standby
mode after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter.
• Display tape information on the TV screen.
• Check the timer settings.
• Watch another TV program.
To lock the VCR after setting the timer (Child Lock)
While the VCR turns on, hold down
`/1
POWER on the VCR until the
-
indicator appears in the display window. The VCR turns off and the
-
indicator remains lit. The VCR will not work except for timer recording.
To unlock the VCR, hold down
`/1
POWER on the VCR until the
-
indicator disappears from the display window. The VCR is unlocked and
turns on.
To stop timer recording while the VCR is locked, press
x
STOP. The
recording stops and the VCR is unlocked.
continued
Basic Operations
18
Tips
• To set the channel, you can also use the CH +/– or number buttons.
• You can set the channel with the shuttle ring during stop. However, you cannot set
the channel with the shuttle ring on the remote commander when:
– you set CABLE MOUSE in the CABLE BOX CONTROL menu to ON.
– you press JOG so that the remote commander is in jog mode.
• To set the tape speed, you can also use the SP/EP button.
•
When you are recording a program in the SP mode and the remaining tape becomes
shorter than the recording time, the tape speed is automatically changed to the EP
mode. Note that some noises will appear on the picture when the tape speed is
changed. If you want to keep the tape speed, set AUTO TAPE SPEED to OFF in the
ADVANCED OPTIONS menu (page 33).
• “LINE3” is reserved for LASER LINK input when viewing the camcorder picture
(page␣35). Cable connection is r ecommended when recording the picture from the
camcorder (page 38).
• When a tape with a SmartFile label attached is inserted, the AUTO BLANK
SEARCH screen appears after closing the menu in step 5. For details, see “Setting
timer recording in the Blank Time space” (page␣50).
Notes
• If you are using cable box control, you cannot select “LINE1”, “LINE2” or “LINE3”.
• The station ID appears on the TV screen only when you complete Smart Channel
Mapping and the VCR receives the program information signal (see page 54 of the
supplied hookup/setup manual).
Setting the timer manually (continued)
19
Additional Operations
Playing/searching
at various speeds
Additional Operations
Shuttle ring
m
REW
M
FF
JOG
Playback options Operation
View the picture during
fast-forward or rewind
Search forward
Search backward
Play at twice the normal speed
Play in slow motion
During fast-forward, hold down
M
FF. During rewind, hold
down
m
REW.
During playback, press
M
FF.
During playback, press
m
REW.
During playback, press
×
2.
During playback or pause, press
y
SLOW +/–. Press the +/–
buttons to change the speed.
m
REW
M
FF
H
PLAY
Shuttle ring
JOG
continued
H
PLAY
x
STOP
×
2
y
SLOW
+/–
CLEAR
TAPE
RETURN