C:\2629955E11RDRHX910E32\GB04BAS-
E32.fm
master page=right
RDR-HX910
2-629-955-
E1
(1)
15
H
o
o
kups an
d Settings
With this hookup, you can record any channel on the cable box or satellite receiver. Be sure that the
satellite receiver or cable box is turned on.
To watch cable or satellite programs, you need to match the channel on the recorder (L1 (line1) or L3
(line3)) to the input jack connected to the cable box or satellite receiver (LINE IN (line in) 1 or 3).
b
Note
Do not connect a hi-definition tuner using the component video cords. This recorder only accepts standard definition
interlace signals.
z
Hints
• If your cable box or satellite receiver has an S-video jack, you can use an S-video cord (not supplied) instead of the
audio/video cord.
• If you connect an S-video cord to the LINE IN (line in) 1 jack, set “Line1 Input” in “Video” setup to “S Video”
(page 96). If you connect an S-video cord to the LINE IN (line in) 3 jack, set “Line3 Input” in “Video” setup to
“S Video” (page 96).
A: Cable box or satellite receiver with a video/audio output
ANT IN
R
L
S VIDEO
AUDIO
OUT
VIDEO
OUT
TO TV
VHF/UHF
~
AC IN
COMPONENT
VIDEO OUT
PB
Y
PR
LINE OUT
1
2
VIDEO
S VIDEO
R-AUDIO-L
IN
OUT
DIGITAL
OUT
COAXIAL
OPTICAL
PCM/DTS/
DOLBY DIGITAL
LINE IN
1
3
VIDEO
S VIDEO
R-AUDIO-L
PB
Y
PR
COMPONENT
VIDEO IN
LINE IN
1
3
VIDEO
S VIDEO
R-AUDIO-L
COMPONENT
VIDEO OUT
P
B
Y
P
R
COMPONENT
VIDEO IN
to LINE IN (line in) 1 or 3
DVD (digital video
disc) recorder
Audio/video cord
(not supplied)
: Signal flow
Cable box/satellite receiver
Antenna cable
(supplied)
to antenna input
S-video cord
(not supplied)
Wall
TV
Component video cord
(not supplied)
to COMPONENT VIDEO IN
(component video in)
,
continued
