C:\2629955E11RDRHX910E32\GB12ADD-
E32.fm
master page=left
RDR-HX910
2-629-955-
E1
(1)
104
The picture from equipment connected to the
recorder’s input jack does not appear on the
screen.
,
If the equipment is connected to the LINE IN
(line in) 1 jacks, select “L1” (line1) in the front
panel display by pressing CH (channel) +/– or
INPUT SELECT (input select).
If the equipment is connected to the LINE 2 IN
(line 2 in) jacks, select “L2” (line2) in the front
panel display by pressing CH (channel) +/– or
INPUT SELECT (input select).
If the equipment is connected to the LINE IN
(line in) 3 jacks, select “L3” (line3) in the front
panel display by pressing CH (channel) +/– or
INPUT SELECT (input select).
If the equipment is connected to the DV IN
(digital video in) jack, (this is usually for a digital
video camera connection), select “DV” (digital
video) in the front panel display by pressing CH
(channel) +/– or INPUT SELECT (input select).
,
When an S video cable is connected to the
recorder’s LINE IN (line in) 1 or 3 jack, set
“Line1 Input” or “Line3 Input” in “Video” setup
to “S Video” (page 96).
The playback picture or TV program from the
equipment connected through the recorder is
distorted.
,
If the playback picture output from a DVD
(digital video disc) player, VCR (video cassette
recorder), or tuner goes through your recorder
before reaching your TV, the copy-protection
signal applied to some programs could affect
picture quality. Disconnect the playback
equipment in question and connect it directly to
your TV.
The picture does not fill the screen.
,
Set “TV Type” in “Video” setup in accordance
with the screen size of your TV (page 94).
The picture does not fill the screen, even
though the picture size is set in “TV Type” in
“Video” setup.
,
The picture size of the title is fixed.
There is no sound.
,
Re-connect all connections securely.
,
The connecting cord is damaged.
,
The input source setting on the amplifier or the
connection to the amplifier is incorrect.
,
The recorder is in reverse play, fast-forward,
slow motion, or pause mode.
,
If the audio signal does not come through the
DIGITAL OUT (digital out) (OPTICAL
(optical) or COAXIAL (coaxial)) jacks, check
the “Audio Connection” settings in “Audio”
setup (page 97).
Sound distortion occurs.
,
Set “Audio ATT” in “Audio” setup to “On”
(page 96).
Sound is noisy.
,
When playing a CD (compact disc) with DTS
(digital theater system) sound tracks, noise will
come from the LINE OUT (line out) 1/2
R-AUDIO-L (right-audio-left) jacks (page 61).
The sound volume is low.
,
The sound volume is low on some DVDs (digital
video disc).
The sound volume may improve if you set
“Audio DRC” in “Audio” setup to “TV Mode”
(page 97).
,
Set “Audio ATT” in “Audio” setup to “Off”
(page 96).
,
One of the TVS (TV Virtual Surround) effects is
selected (page 59).
Sound
