Sony RDR-HX820, Руководство по обслуживанию

Страница: 10 / 120

1-4
16
Use this hookup if you watch cable programme position without a cable box. Also use this
hookup if you are connecting just an aerial antenna.
With this hookup, you can record any programme position by selecting the programme position
on the recorder.
C: Connecting the aerial cable only (no set top box receiver)
DVD recorder
TV
to aerial input
to AERIAL IN
to AERIAL OUT
Aerial cable (supplied)
: Signal flow
Wall
17
H
ook
up
s
and
Se
tti
n
gs
Step 2: Connecting the Video Cords/HDMI Cord
Select one of the following patterns,
A
through
E
, according to the input jack on your TV
monitor, projector, or AV amplifier (receiver). This will enable you to view pictures.
VIDEO
AUDIO
INPUT
L
R
P
R
/C
R
P
B
/C
B
Y
COMPONENT
VIDEO IN
INPUT
S VIDEO IN HDMI
D B
E C A
Audio/video cord
(not supplied)
Component
video cord
(not supplied)
(yellow)
TV, projector, or AV
amplifier (receiver)
TV, projector, or AV
amplifier (receiver)
(green)
S-video cord
(not supplied)
TV, projector, or AV
amplifier (receiver)
(red) (blue)
(green)
(blue)
(red)
: Signal flow
to COMPONENT
VIDEO OUT
to LINE 2 OUT
(S VIDEO)
to LINE 2 OUT (VIDEO)
SCART cord
(not supplied)
to
i
LINE 1 – TV
DVD recorder
TV
HDMI cord
(not supplied)
TV, projector, or AV
amplifier (receiver)
to HDMI OUT
,
continued
18
A
SCART input jack
When you set “Easy Setup - Line1 Output” to
“S Video” or “RGB” (page 25), use a
SCART cord that conforms to the selected
signal.
B
Video input jack
You will enjoy standard quality images.
C
S VIDEO input jack
You will enjoy high quality images.
D
Component video input jacks (Y, P
B
/C
B
,
P
R
/C
R
)
You will enjoy accurate colour reproduction
and high quality images.
If your TV accepts progressive 525p/625p
format signals, use this connection and set
“Component Out” in the “Video” setup to
“On” (page 102). Then set “Progressive
Output” to “On” in the “Video” setup to send
progressive video signals. For details, see
“Progressive Output” on page 102.
E
HDMI input jack
Use a certified HDMI cord (not supplied) to
enjoy high quality digital picture and sound
through the HDMI OUT jack.
When playing “wide screen” images
Some recorded images may not fit your TV
screen. To change the picture size, see
page 101.
If you are connecting to a VCR
Connect your VCR to the LINE 3/
DECODER jack on the recorder (page 28).
b
Notes
• Do not connect more than one type of video cord
between the recorder and your TV at the same
time.
• When you connect the recorder to your TV via the
SCART jacks, the TV’s input source is set to the
recorder automatically when you start playback.
If necessary, press TV
t
to return the input to
the TV.
• For correct SMARTLINK connection, you will
need a SCART cord that has the full 21 pins.
Refer to your TV’s instruction manual as well for
this connection.
• If you connect this recorder to a TV with
SMARTLINK, set “Easy Setup - Line1 Output”
to “Video.”
• You cannot connect the HDMI OUT jack
(connection
E
) to DVI jacks that are not HDCP
compliant (e.g., DVI jacks on PC displays).
* This DVD recorder incorporates High-Definition
Multimedia Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
If the connected TV (or other connected
equipment such as a set top box) complies
with SMARTLINK, NexTView Link
*3
,
MEGALOGIC
*1
, EASYLINK
*2
,
CINEMALINK
*2
, Q-Link
*3
, EURO VIEW
LINK
*4
, or T-V LINK
*5
, you can enjoy the
following SMARTLINK features.
For recording
• TV Direct Rec.
You can easily record what you are
watching on your TV (page 34).
• One Touch EPG
You can turn on the recorder and TV, set the
TV to the recorder’s programme position,
and display the GUIDE Plus+ system
“Home Screen” with one touch of the TV
GUIDE button.
About the SMARTLINK
features (for SCART
connections only)
19
H
ook
up
s
and
Se
tti
n
gs
For playback
• One Touch Play
You can turn on the recorder and TV, set the
TV’s input to the recorder, and start
playback with one touch of the
H
(play)
button (page 67).
• One Touch Menu
You can turn on the recorder and TV, set the
TV to the recorder’s programme position,
and display the Title List menu with one
touch of the TITLE LIST button (page 67).
For settings
• Preset Download
You can download the tuner preset data
from your TV to this recorder, and tune the
recorder according to that data in “Easy
Setup.” This greatly simplifies the “Easy
Setup” procedure.
• Automatic Power Off
The recorder will turn off automatically if
the recorder is not used after you turn off
the TV.
• NexTView Download
You can easily set the timer by using the
NexTView Download function on your TV.
See your TV’s instruction manual.
*1
“MEGALOGIC” is a registered trademark of
Grundig Corporation.
*2
“EASYLINK” and “CINEMALINK” are
trademarks of Philips Corporation.
*3
“Q-Link” and “NexTView Link” are trademarks
of Panasonic Corporation.
*4
“EURO VIEW LINK” is a trademark of Toshiba
Corporation.
*5
“T-V LINK” is a trademark of JVC Corporation.
z
Hint
SMARTLINK also works with TVs or other
equipment having EPG Timer Control, EPG Title
Download, and Now Recording functions. For
details, refer to the operating instructions supplied
with your TV or other equipment.
b
Notes
• The SMARTLINK features are available only
when “Video” is selected in “Line1 Output.”
• The power must be turned on to use all
SMARTLINK features except One Touch Play,
One Touch Menu and One Touch EPG.
• Not all TVs respond to the functions above.