Part Identification
10
Ov
e
rv
ie
w
To mount the accessory shoe
Mount the accessory shoe on the accessory shoe
mount as illustrated.
1.
Lift the edge of the accessory shoe plate and
pull it in the direction opposite to that of the
arrow on the accessory shoe plate and
remove it from the accessory shoe.
2.
Place the accessory shoe so its protrusions
match recesses of the accessory shoe mount,
then fix it to the mount with four screws.
3.
Insert the accessory shoe plate in the
direction of the arrow on the plate surface
until the end of the plate engages the end of
the shoe.
To remove the accessory shoe
Remove the shoe plate in the same way as step 1
of “To mount the accessory shoe.” Loosen the 4
screws and remove the accessory shoe from the
accessory shoe mount.
Operation panel on the handle
1.
PLAY/PAUSE button
2.
F REV (fast reverse) button
3.
THUMBNAIL button
4.
STOP/CAM button
5.
STATUS (status display on/off) button
6.
PREV (previous) button
7.
Up/down/left/right buttons, SEL/SET
(select/set) button
8.
MENU (menu display on/off) button
9.
On-handle ZOOM button
10.
F FWD (fast forward) button
11.
LCD BRIGHT (LCD brightness
adjustment) button
12.
NEXT (clip directional jump) button
13.
DISPLAY button
14.
VOLUME (monitor volume) buttons
15.
CANCEL button
16.
DURATION/TC/U-BIT (time data
selection) button
17.
REC START/STOP button
18.
REC HOLD lever
Accessory shoe
Accessory shoe plate
Accessory shoe
Accessory shoe plate
1
2
3
4
5
6
10
9
7
8
11
12
13
14
15
16
17
18