Sony PS-HX500, Руководство по обслуживанию

Страница: 9 / 26

PS-HX500
9
SECTION 2
DISASSEMBLY
• This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
Note: Follow the disassembly procedure in the numerical order given.
2-2. HINGE ASSY, DUST COVER ASSY
2-2. HINGE ASSY,
DUST COVER ASSY
(Page 9)
2-4. BELT, PLATTER
(Page 10)
2-3. COUNTER WEIGHT
(Page 10)
2-7. FOOT ASSY, COVER_MOTOR
(Page 12)
2-11. TONE ARM ASSY
(Page
15)
2-5. CASE
(Page
11)
2-6. MAIN BOARD
(Page 11)
2-9. MOTOR ASSY (M1)
(Page 13)
2-8. SWITCH KNOB
(Page 12)
2-10. SW BOARD
(Page
14)
SET
STYLUS
Note: Illustration of disassembly is omitted.
(Refer to “REPLACING THE STYLUS” on page 4)
1
Fully open the
dust cover.
3
Remove the dust cover block
in the direction of the arrow.
5 hinge assy
5
hinge assy
6
dust cover assy
2
Grasp this portion,
lift up slowly.
2 Grasp this portion,
lift up slowly.
rear side
4 dust cover block