REPACKING FOR SHIPMENT
The original shipping carton and packing material (which We asked you to save} is the ideai container for use in
shipping the unit for repair work, or to another location. To secure the maximum protection. it must be repacked in
this material precisely as before. The proper repacking procedure is in the illustration.
0CIip the tonearm to the arm rest and bind it there with a
tape.
10
SPECIFICATIONS
Turntable
Pfatter 32.6 cm dia., Aluminum-alloy
die-cast
Motor DC servo-controlied motor {brushless
Drive system Speed
Pitch control range Wow and flutter
Signal-to-noise ratio 70 dB [DIN-B}
Tonearm Type Statically balanced, universal
Pivot to stylus length Overall arm length Overhang
O — 3 g Shell weight 7.5 g Cartridge Weight range
4 -12 g
Cartridge VL-32G Type Frequency range Channel separation Output voltage Load impedance Tracking force
Moving magnet type 10--30.000 Hz
25 dB at 1,000 Hz 3 mV at 1 kHz, 5 cm,-"sec, 45“ 50 kilohms
1.5 — 2.5 g (2 g recommended)
Approx. 7,1‘ kg (‘I5 lb 10 oz) in shipping carton
Aiignrnent Protractor 45-rpm Adaptor Cartridge Spacer Power Cord
Suppiied accessories
Whilst the information given is true at the time of printing. small production changes in the course of our c0mpany’s
policy of improvement through research and design might not necessarily be indicated in the specifications. We
would ask you to check with your appointed Sony dealer if clarification on any point is required.
