manualshive.com logo in svg

Sony PCV-RX740, Справочное руководство, Страница: 86 / 92

Поделиться
Скачать
Sony PCV-RX740 Скачать руководство пользователя страница 86

VAIO Computer System Reference Manual

72

I/O and Expansion Slots 

Floppy Disk Drive and Controller 

 

Hard Drives and Controller 

 

Serial ports

One high-speed NS16C550-compatible port

Parallel port

One high-speed bi-directional Centronics-
compatible port with ECP and EPP modes

Modem jacks

Two RJ-11 jacks (telephone and line)

USB ports

*

*

Universal Serial Port (USB) technology only supports version 1.1.

USB1 and USB2 (on front panel)
USB3 and USB4 (on rear panel)
(See online specifications sheet for details.)

PCI slots

Four available slots. Not all PCI slots are available 
for expansion.

CNR slot

One slot for a CNR modem.

IDE headers 

Primary and secondary 
(each supports two ATA-100 IDE drives)

i.LINK® (IEEE 1394) 
ports

One 4-pin port on front panel
One 6-pin port on rear panel

Drive

Description

Floppy disk controller 

82077-compatible (supports up to 2.88 MB)

Floppy disk drive

3.5-inch, 1.44 MB

Drive

Description

EIDE controller

Supports up to four EIDE drives (supports PIO Mode 4 
EIDE drives and Ultra DMA/100 Mode drives)

IDE hard drive

*

*

Bus-mastering EIDE driver installed.

See online specifications sheet for details.

Содержание PCV-RX740





























































































Отзывы:

Нет отзывов