Sony PCV-RX740 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 92

background image

VAIO Computer System Reference Manual

vi

Regulatory Information

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:

❑

Reorient or relocate the receiving antenna.

❑

Increase the separation between the
equipment and the receiver.

❑

Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.

❑

Consult the dealer or an experienced radio/
TV technician for help.

You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.

Only peripherals (computer input/output devices,
terminals, printers, etc.) that comply with FCC Class
B limits may be attached to this computer product.
Operation with noncompliant peripherals is likely to
result in interference to radio and television
reception.

All cables used to connect peripherals must be
shielded and grounded. Operation with cables,
connected to peripherals, that are not shielded and
grounded, may result in interference to radio and
television reception.

Declaration of Conformity

Trade Name:

SONY

Model No.:

PCV-7753

Responsible Party:

Sony Electronics Inc.

Address:

680 Kinderkamack Rd
Oradell, NJ 07649

Telephone: 201-930-6972

This phone number is for FCC-related matters
only.

This device complies with Part 15 of the FCC
rules. Operation is subject to the following two
conditions:

(1) This device may not cause harmful
interference, and

(2) this device must accept any interference
received, including interference that may cause
undesired operation.

«
...
4
5
6
7
8
...
»

Содержание PCV-RX740





























































































Отзывы:

Нет отзывов

Похожие инструкции для PCV-RX740

Бренд: IBM Страницы: 18

Бренд: IBM Страницы: 152

Бренд: Olivetti Страницы: 118

Бренд: IBASE Technology Страницы: 68

Бренд: Radio Shack Страницы: 40

Бренд: Vivo Страницы: 8

Бренд: Ergo Страницы: 33

MPC-2070 Series

Бренд: Moxa Technologies Страницы: 10

MPC-2101 Series

Бренд: Moxa Technologies Страницы: 51

DA-681-I-SP-XPE

Бренд: Moxa Technologies Страницы: 2

Бренд: Moxa Technologies Страницы: 73

Бренд: AXIOMTEK Страницы: 54

Бренд: Rikomagic Страницы: 27

B8253T65V10E4HR

Бренд: TYAN Страницы: 100

Бренд: CONNECTA Страницы: 4

Бренд: ROBINHOOD Страницы: 10

Бренд: LEXIBOOK Страницы: 5

Бренд: I-Tech Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды