Sony PCV-RX740 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 92

background image

VAIO Computer System Reference Manual

ii

NOTICE

© 2002 Sony Electronics Inc. Reproduction in whole
or in part without written permission is prohibited.
All rights reserved. This manual and the software
described herein, in whole or in part, may not be
reproduced, translated, or reduced to any machine-
readable form without prior written approval.

SONY ELECTRONICS INC. PROVIDES NO
WARRANTY WITH REGARD TO THIS
MANUAL, THE SOFTWARE, OR OTHER
INFORMATION CONTAINED HEREIN AND
HEREBY EXPRESSLY DISCLAIMS ANY
IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE WITH REGARD TO
THIS MANUAL, THE SOFTWARE, OR SUCH
OTHER INFORMATION. IN NO EVENT SHALL
SONY ELECTRONICS INC. BE LIABLE FOR
ANY INCIDENTAL, CONSEQUENTIAL, OR
SPECIAL DAMAGES, WHETHER BASED ON
TORT, CONTRACT, OR OTHERWISE, ARISING
OUT OF OR IN CONNECTION WITH THIS
MANUAL, THE SOFTWARE, OR OTHER
INFORMATION CONTAINED HEREIN OR THE
USE THEREOF.

Sony Electronics Inc. reserves the right to make any
modification to this manual or the information
contained herein at any time without notice. The
software described herein is governed by the terms of
a separate user license agreement.

This product contains software owned by Sony and
licensed by third parties. Use of such software is
subject to the terms and conditions of license
agreements enclosed with this product. Some of the
software may not be transported or used outside the
United States. Software specifications are subject to
change without notice and may not necessarily be
identical to current retail versions.

Certain product(s) included with this computer may
include features such as copy protection and content
management technology. USE OF THE SOFTWARE
PRODUCT(S) REQUIRES AGREEMENT TO
APPLICABLE END USER AGREEMENTS AND
FULL COMPLIANCE WITH APPLICABLE
PRODUCT ACTIVATION PROCEDURES. Product
activation procedures and privacy policies will be
detailed during initial launch of the software
product(s), or upon certain reinstallations of the
software product(s), or reconfigurations of the
computer, and may be completed by Internet or
telephone (toll charges may apply).

Updates and additions to software may require an
additional charge. Subscriptions to online service
providers may require a fee and credit card
information. Financial services may require prior
arrangements with participating financial
institutions.

Sony, VAIO, the VAIO logo, VAIO Smart,
MovieShaker, DVgate, i.LINK, Memory Stick and
the Memory Stick logo are trademarks or registered
trademarks of Sony.

AMD, Athlon and Quantispeed are trademarks or
registered trademarks of Advanced Micro Devices.
Microsoft, Windows, and the Windows logo are
trademarks or registered trademarks of Microsoft
Corporation. PS/2 is a registered trademark of IBM
Corporation.

All other trademarks are trademarks or registered
trademarks of their respective owners.

«
1
2
3
4
...
»

Содержание PCV-RX740





























































































Отзывы:

Нет отзывов

Похожие инструкции для PCV-RX740

Бренд: Challenger Страницы: 96

Бренд: ADLINK Technology Страницы: 76

Бренд: DAWAR Страницы: 10

Бренд: Moxa Technologies Страницы: 42

Бренд: Asus Страницы: 18

Бренд: Asus Страницы: 174

Бренд: Asus Страницы: 166

Бренд: Agilent Technologies Страницы: 220

Staff Workstation 795

Бренд: 3M Страницы: 44

Бренд: Jaco Страницы: 28

DRIVE TWO PLUS 1500

Бренд: RACORE COMPUTERS Страницы: 66

Бренд: Wang Страницы: 414

Бренд: Quanmax Страницы: 39

Бренд: Quanmax Страницы: 36

Бренд: Tangent Страницы: 2

Бренд: UMAX Technologies Страницы: 24

Бренд: IBM Страницы: 54

Бренд: IBM Страницы: 454

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды