![background image](http://html.mh-extra.com/html/sony/pcm-7040/pcm-7040_operation-manual_417416057.webp)
Chapter 6
6-8
Chapter 6
Advanced Operations
To increase the number: Turn the search dial
clockwise.
To decrease the number: Turn the search dial
counterclockwise.
To set the chase offset time back to “0”:Press
the RESET key while holding down DATA
key.
Digits “S”, “F” and “B” are linked so that
incrementing or decrementing through “00” for
“F” or “B” will change the others appropriately.
(In that case, you need not press the SET key in
step 5.) Digits “H”, “M” and “S” are not linked in
this manner and must be adjusted independently.
4
Repeat steps 2 and 3 to set all the units.
5
Press the SET key.
Flashing stops and the setting of the chase offset
time is stored.
Note
When the SMPTE drop frame time code is used and
the time code whose frames are dropped is set, the
time code whose frames are not dropped is displayed
automatically.
Example: When “00H01M00S00F” is set,
“00H01M00S02F” appears.
Instant chase lock procedure
In instant chase lock mode, the unit calculates the time
difference between the external (input) time code and
the unit’s playback time code, or between the external
time code and the previously set locate point time
code.
Using that value as the chase offset time, the unit
automatically enters the chase mode.
3
2
To chase the external time code value to make the
playback time code value agree with the external
time code
1
Advance the tape to the desired point on the
controlling device and on this unit.
2
Press the DISPLAY key.
“CHASE OFFSET” appears in the DISPLAY key
menu display area.
3
Press the SET key while pressing the DATA key.
The CHASE mode indicator lights and this unit
enters the chase mode.
The unit calculates the offset value and displays it
in the input/set data display area.
Chase offset value=Playback time code value –
(minus) External time code value
To chase the external time code value to make the
locate point time code value agree with external
time code
1
Play back from the controlling device and input the
locate point time code value to this unit.
2
Press the DISPLAY key of this unit and set the
display to “LOCATE POINT” (time code).
3
Play back from this unit, and set the locate point
time code value of this unit to correspond to the
picture or sound of the controlling unit by using
the MARK key or the search dial. To set the locate
point precisely, also use the memory start function.
4
Press the SET key while holding down the DATA
key.
The CHASE mode indicator lights and this unit
enters chase mode. The unit calculates the offset
value and displays it in the input/set data area.
Chase offset value=Locate point time code value –
(minus) External time code value
Note
The offset value is automatically calculated in units of
bits.
6-2 Other Advanced Operations
Содержание PCM-7040
