5-1 Playback
Chapter 5
5-2
Chapter 5
Playback
Display during cuing mode
While cuing, the unit indicates the cue speed on the
display.
The meaning of the display contents are shown
below.
SHtL: Shuttle mode
JoG: Jog mode
StL: Still (Pause)
0_2: 1/5 normal speed
0_5: 1/2 normal speed
1: Normal playback speed
3: 3 times normal speed
8: 8 times normal speed
16: 16 times normal speed
– – –: The unit is not in the cue mode.
About the CUE mode key during recording
The CUE mode key is disabled during recording to
prevent accidental operation.
Getting out of cue mode
Press one of the tape transport control keys such, as the
PLAY key or STOP key, or press the CUE mode key
again to get out of the cue mode. The indication on the
display returns to normal display mode. When you
press the CUE key to get out of the cue mode, the unit
enters the STOP mode (with the factory setting).
You can change the tape transport mode, which the
unit enters after the cue mode, to the playback mode
by using “Aftr cuE (AFTER CUE)” of the Setup
menu.
See section 7-3 “Dial Menu Operations” (page 7-5).
5-1-3 Locating Specific Points on
a Tape
This unit can locate a specific tape point quickly. The
“time code locate” locates a desired point using the
time code, the “start ID locate” locates the IDs on the
tape, and the “Program number locate” locates the
Program number of the IDs on the tape which have
been set beforehand.
Time code location
The unit locates the point displayed on the input/set
data display area. You can set the point by:
• pressing the MARK key while listening to the
playback sound, or
• using the DISPLAY key menu to set the time code if
you know the exact time code to be located.
To set the locate point using the MARK key
While listening to the playback sound, you can store a
time code in memory. The stored time code will be
used as the locate point.
Press the MARK key while monitoring the playback
sound and the display in the tape time display area.
The time code of the point appears in the input/set data
display area as the locate point.
Tape time display area
Input/set data display area
MARK key
Cue speed
* * *
Содержание PCM-7040
