Sony PCM-7040, Руководство по эксплуатации

Страница: 16 / 91

Chapter 2
Chapter 2 Location and Function of Parts and Controls
2-9
ANALOG DIGITAL TIME CODE REF VIDEO WORD SYNC
INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT
INPUT INPUT
OUTPUT
75
Ω
ON
OFF
75
Ω
ON
OFF
AC IN
INPUT INPUT INPUT INPUT
CH-1 CH-2 CH-1 CH-2
MONITOR
CH-2 CH-1
REMOTE(37P) REMOTE(9P) RS232C REMOTE(8P)
1 2 3 4 5
!“ 8 7
6
9 0 !`
1
ANALOG audio input/output section
ANALOG INPUT (analog audio input) connectors
(equivalent to XLR type)
CH-1: Inputs the channel 1 analog audio signal (L).
CH-2: Inputs the channel 2 analog audio signal (R).
ANALOG OUTPUT (analog audio output)
connectors (equivalent to XLR type)
CH-1: Outputs the channel 1 analog audio signal (L).
CH-2: Outputs the channel 2 analog audio signal (R).
2 DIGITAL audio input/output section
DIGITAL INPUT (digital audio input) connector
Inputs digital audio signals in the AES/EBU format.
DIGITAL OUTPUT (digital audio output)
connector
Outputs digital audio signals in the AES/EBU format.
3
TIME CODE input/output section
TIME CODE INPUT connector
Inputs the SMPTE/EBU time code.
TIME CODE OUTPUT connector
Outputs the SMPTE/EBU time code.
2-3 Connector Panel (Rear)
4
REF VIDEO input section
REF VIDEO INPUT (reference video input)
connector
Inputs a video sync signal.
These are a pair of loop-through connectors.
75-ohm termination switch
ON: The input signal is terminated in 75 ohms.
OFF: High input impedance is set so that the input
signal may be looped through the two connectors
for connection to other equipment.
(Continued)