About 40 alphabetical characters (single-byte characters) are
recommended for displaying on the screen of your Walkman.
Time information must be entered in chronological order.
You can separate seconds and hundredths of a second by a
period instead of a colon.
You can omit hundredths of a second.
After finishing lyrics text input, save it as a file.
Select “File.”
i.
Select “Save As...” to open the “Save As” screen.
ii.
Select “All Files” in the “Save as type:” list at the bottom of the
screen.
iii.
Select “UTF-8” in the “Encode:” list.
iv.
Enter the file name into the “File name:” text box.
v.
Click “Save” to save the LRC file.
vi.
The file name must be the same as the audio file, with the
extension “.lrc.”
The maximum size for an LRC file is 512 KB.
If a text line cannot fit in the screen, it will be wrapped (up to 3
lines).
Characters beyond 3 lines will not be displayed.
CR, CRLF and LF line breaks are all recognized properly.
Blank text lines are skipped.
4.
Connect your Walkman to your computer via USB.
5.
Open “WALKMAN” using the procedure below that corresponds to
your computer.
6.
Help Guide
http://helpguide.sony.net/dmp/nwa20/v1/en/print.html
86 sur 237
08/06/16 16:25