background image

6

What Sony provides

Sony

®

New Entertainment Solutions come equipped with the following parts and supplies only:

• The system rack.

• System rack A/V components.

These include an A/V receiver, multi-room distribution unit, 5-

disc DVD/CD changer, VHS recorder, 400-disc CD-only changer and, in the case of the NHS-

2000, a second DVD/CD changer with 400-disc capacity.   

• System rack internal wiring.

• Main room RF remote control

along with the RF remote antenna, remote recharger cradle

and recharger cradle ferrite core.

• Remote room in-wall keypads

for two remote rooms (expandable to six).

• Remote room infrared handheld remote controls

for two remote rooms (expandable to six). 

• Individual component remote controls.

For the Sony components in the system rack.

• Individual component operating instructions.

For the Sony components in the system rack. 

System

NHS-2000

NHS-1000

Number of rooms

3 (Main + 2 remote)

expandable to 7
(main + 6 remote)

3 (Main + 2 remote)

expandable to 7
(main + 6 remote)

Number of zones

3 (expandable to 7)

3 (expandable to 7)

Remote rooms with audio and video from main system

3 (expandable to 7)

3 (expandable to 7)

In-wall remote controls

2 (expandable to 6)

2 (expandable to 6)

Sony A/V receiver

Yes

Yes

Sony multi-room distribution unit

Yes

Yes

Sony 5-disc DVD/CD changer

Yes

Yes

Sony  400-disc DVD/CD changer

Yes

-

Sony 400-disc CD-only changer

Yes

Yes

Sony VHS Hi-Fi VCR

Yes

Yes

Planning

Содержание NHS-1000







































Отзывы: