US
Removing the lens
While pressing the lens release button all the way in, turn the lens
counterclockwise until it stops.
When you remove the lens, make sure that you hold both of the lens and the camcorder body.
Replace the packaging lid on the lens and attach the body cap to the
camcorder body.
Align the mark on the body cap to the mounting indexes, and turn the cap clockwise.
Before you attach caps, remove dust from them.
Notes
When changing the lens, if dust or debris gets inside the camcorder body and adheres to the surface of
the image sensor (the part that acts as the film), it may appear on the image, depending on the shooting
conditions. The image sensor is applied with the anti-dust coating, to prevent dust from adhering to the
image sensor. However, attach or remove the lens quickly somewhere away from dusty locations.
Do not leave the camcorder body with the lens and body cap removed.
Lens release button
Align the marks.
