Sony NAS-CZ1 M-Crew, Руководство по обслуживанию

Страница: 24 / 72

24
HCD-CZ1/NAS-CZ1
Digit Contents Value Detail
1st Error number 0 to 9 “0” is latest error
01 Focus error
02 GFS error
03 Time out of wake up
2nd and 3rd Kind of error 04 Defocused continuously
05 Q code error
06 Can not tracking on
07 Blank disc
01 Shipping
02 Power off in progress
03 Power on in progress
04 Initializing
05 Oscillation stop status
06 Starting up the oscillation
4th and 5th Process when an 07 Stop status
error occurred 08 Stopping in progress
09 Starting up in progress
0a TOC reading
0b Searching
0c Playback in progress
0d Pause in progress
0e Playback manual searching
0f Pause manual searching
Step number
6th and 7th when an error XX Step number
occurred
01 Normal speed
8th and 9th
02 Double speed
04 4 times speed
10th an 11th Not used 00 Fixed at “00”
Error detail:
Disc speed
when an error
occurred
CD SERVICE MODE
1. Press the
I/ 1
button to turn the power on.
2. Press the
[FUNCTION]
button to select “CD”.
3. Press three buttons of [VOL +] ,
N
and [1] simultaneously.
4. If this mode is activated, “SERVICE MODE” is displayed on
the fluorescent indicator tube. (Goes off that display when
release three buttons)
5. In this mode, it operation as following table.
*1) Use the remote commander (RM-ANP002)
6. To release this mode, press the
I/ 1
button to turn the power
off.
Buttons Display Operation
. *
1
SLED OUT Move the sled to outer side
>
* 1 SLED IN Move the sled to inner side
N
LD ON or LD OF Laser diode on / off
CD SERVO TEST MODE
1. Press the
I/ 1
button to turn the power on.
2. Press the
[FUNCTION]
button to select “CD”
3. Press three buttons of
VOL +
,
N
and 2 simultaneously.
4. In this mode, it the display changes as follows (Servo test
menu mode) by pressing the
.
or
>
keys on remote
commander (RM-ANP002).
5. To release this mode, press the
I/ 1
button to turn the power
off.
Servo test menu:
1. bdt S CURVE mode
* This mode is use the S-curve check.
1. In the servo test menu mode, press the
.
or
>
keys on
remote commander (RM-ANP002) to select “<bdt S
CURVE>”.
2. Press the
[ENTER]
key to enter the S-curve mode.
3. To back to the servo test menu mode, press the
x
key on
remote commander (RM-ANP002)
2. bdt RAM READ made
1. In the servo test menu mode, press the
.
or
>
keys on
remote commander (RM-ANP002) to select “<bdt RAM
READ>”.
2. Press the
[ENTER]
key to enter the RAM read mode.
3. In this mode, the display cyclic changes as follow by pressing
the
[ALBUM -]
or
[ALBUM+]
key.
r
bdt S CURVE
r
bdt RAM READ
r
bdt RAM WRITE
r
bdt COMOUT
r
bdt ERR RATE
Display Item
DISC SIZE 00:no disc, 01:8cm disc,02:12cm disc
RFDoffset RFDC offset value
RFAoffset RFAC offset value
FE offset FE offset value
TE offset TE offset value
RF gain_2 RF AMP secondly gain value
TE gain_2 TE secondly gain value
EFBALgain EF balance gain value
EQ BOOT EQ boot setting value
4. To back to the servo test menu mode, press the
x
key on
remote commander (RM-ANP002)
www. xiaoyu163. com
QQ 376315150
9 9
2
8 9
4 2
9 8
TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com