– 15 –
• Description of Indication History
History code number
Description
1st
0
The first error
1st
1
Displays “00”
1st
2
Displays “00”
N
0
The last error
N
1
Displays “00”
N
2
Displays “00”
N-1 0
One error before the last.
N-1 1
Displays “00”
N-1 2
Displays “00”
N-2 0
Two errors before the last.
N-2 1
Displays “00”
N-2 2
Displays “00”
R
Total recording time (Displays “0000” in this set)
• Description of Error Indication Codes
Reset the error display code
After servicing, reset the error display code.
1. Setting the test mode (see page 12).
2. Press the
[DISPLAY]
key activates the self-diagnosis display mode.
3. To reset the error display code, press the
X
key (2 times) when the code is displayed (except “R 0000”).
(All the data on the 1st, N, N-1, and N-2 will be reset)
Problem
Indication code
Meaning of code
Description
No error
00
No error
Normal condition
01
Illegal access target address
Attempt to access an abnormal address
was specified
Servo error
02
High temperture
High temperture
03
Focus error
Forcus could not be applied
04
Spindle error
Abnormal lotation of disc
Power error
22
Low battery
Momentary interruption detected
