manualshive.com logo in svg

Sony MSW-M2100, Руководство по эксплуатации, Страница: 97 / 123

Поделиться
Скачать
Sony MSW-M2100 Скачать руководство пользователя страница 97

Chapter 11

Setup Menus

Chapter 11

Setup Menus

11-15

Menu items in the range 600 to 650, relating to the time code generator

Menu items in the range 500 to 599, relating to tape protection (Continued)

Item number

Item name

Settings

506

DRUM ROTATION TIMER The drum motor continues to rotate when the unit is in any of the following states.

• Menu item 502 or 503: T.REL (the tape protection mode is tension release

mode)

• Menu item 504: ON (the drum rotates in Standby OFF mode)
• Menu item 505: LOOSE (reduce the tape tension in still playback mode)
This item specifies the time from the time when the unit enters tension release or
LOOSE mode until the time when it enters Standby OFF mode and drum rotation
stops.

1M to 30M, 1H to 4H to 8H:

 Set the value in the range 1 minute to 8 hours.

Item number

Item name

Settings

606

TC OUTPUT SIGNAL IN
REGEN MODE

Select the signal output from the TIME CODE OUT connector during playback at
normal (

×

1) speed.

TAPE:

 The playback time code signal is output without regeneration. (The time

code values do not correspond to the video output.)

REGEN :

 The playback time code is output after regeneration.

AUTO:

 Can be selected with MSW SY software version 4.0 and later.

The operation with the AUTO setting is as follows.
• The playback timecode (LTC) signal is output delayed, to coincide with the

output video signal.

• Operation is independent of the internal timecode generator settings or editing

state.

• The output video signal and LTC are only accurately synchronized for normal

speed playback.

Содержание MSW-M2100




























































































































Отзывы:

Нет отзывов