Chapter 3
Preparations
Chapter 3
Preparations
3-11
3-6 Using a “Memory Stick”
When a “Memory Stick” is inserted in the VTR, the
file data can be stored on the “Memory Stick”, which
enables you to share data among cameras.
Note
Use a “Memory Stick” formatted with this VTR. It
cannot be shared with other devices.
For more details, refer to the Maintenance Manual.
Inserting a “Memory Stick”
Insert a “Memory Stick” with the label side up into the
“Memory Stick” slot until it clicks.
Note
Never insert/remove a “Memory Stick” during access
to data.
To remove a “Memory Stick”
If you push the inserted “Memory Stick”, the
“Memory Stick” will pop out a little. Then pull the
“Memory Stick” out.
3-6-1 Notes on “Memory Stick”
Available types of “Memory Stick”
You can use a “Memory Stick” and “Memory Stick
PRO” with the MSW-2000 series.
Notes
• You can not use a “Memory Stick Duo” alone with
the MSW-2000 series. To use a “Memory Stick Duo”
with this unit, be sure to attach it to an optional
“Memory Stick Duo” Adaptor. If you insert a
“Memory Stick Duo” without the adaptor, it may
become stuck in the slot and impossible to remove.
• This unit does not support “Memory Stick PRO”
products with more than 2 gigabytes of capacity.
Note on data read/write speed
Data read/write speed may vary depending on the
combination of the “Memory Stick” and “Memory
Stick” compliant product you use.
Before using a “Memory Stick”
• You cannot record or erase data when the write-
protect tab on the “Memory Stick” is set to LOCK.
• We recommend backing up important data.
• Image data may be damaged in the following cases:
– If you remove the “Memory Stick”, or turn the
power off during access to data
– If you use a “Memory Stick” near static electricity
or a magnetic field
Notes
• Prevent metallic objects or your finger from coming
into contact with the terminal of the connecting
section.
• Do not attach any material other than the supplied
label to the label space.
• Attach the label at the prescribed labeling position.
Make sure the label is attached at the labeling
position properly.
• Do not bend, drop, or apply strong shock to a
“Memory Stick”.
• Do not disassemble or modify a “Memory Stick”.
• Do not let the “Memory Stick” get wet.
• Do not use or keep a “Memory Stick” in locations
that are:
– Extremely hot such as in a car parked in the sun
– Under direct sunlight
– Very humid or subject to corrosive gases
Label side
“Memory Stick”
Labeling position
Write-protect tab
Terminal