Sony MPE-200, Руководство по установке

Страница: 14 / 26

1-6 (E)
MPE-200
1-6. Matching Connectors and Cables
Use the following connectors, cables or equivalents when connecting cables to the unit.
Panel indication Connector name Matching connector and cable
Name Sony part No.
NETWORK-1 RJ-45 modular jack * 1 _ _
NETWORK-2
RS-232C D-sub 9-pin, Male D-sub 9-pin, Female
Connector 9-pin, Female
1-563-815-21 * 2
Junction Shell 9-pin 1-563-375-11
USB USB Type A USB cable _
IN 1 to 4 BNC, 75 Z Belden 1694 coaxial cable _
OUT1 1 to 4
REF IN
*
1 : Conforms to the IEEE 802.3 Ethernet 10BASE-T/100BASE-TX/1000BASE-T standards.
* 2 : The following crimp contact is required for the socket.
AWG#24 to #26 : 1-563-814-11
1-7. Input and Output Signals of Connectors
The input and output signals of the connectors at the rear panel are as follows.
IN 1 to 4 HD SDI Video Input (BNC) (4):
Signal format: Conforms to SMPTE 292M
Video format: 1080/59.94i, 1080/50i, 1080/23.98PsF, 4:2:2 (Y, Cb, Cr)/10 bit
Level: 0.8 V p-p
±
10 %
Input impedance: 75 Z , unbalanced
Signal transfer distance: 100 m (BELDEN 1694 or equivalent used)
OUT1 1 to 4 HD SDI Video Output (BNC) (4):
Signal format: Conforms to SMPTE 292M
Video format: 1080/59.94i, 1080/50i, 1080/23.98PsF, 4:2:2 (Y, Cb, Cr)/10 bit
Output amplitude: 0.8 V p-p
±
10 %
Output impedance: 75
Z
, unbalanced
REF IN (BNC):
75
Z
, terminated
HD tri-level sync/SD black burst
Return Loss :
_ 40 dB