1-10 (E)
MPE-200
<LED >
Ref No.
Address
Name
Indication
Function
Normal state
color
D107
(A-2)
1
Red
Displays the status at the time when an error was detected
Lights off
in combination with INFORMATION LED on the front panel.
*
1
D108 to
(A-2)
2 to 5
Green
Displays the error status when D107 lights or blinks.
*
2
Lights off
111
*
1:
State
INFORMATION LED
D107 “1”
Warning state
Blinking (blue)
Blinking (red)
Error state
Blinking (red)
Lit (red)
*
2:
Error status display
When an abnormality is detected and error LED “1” inside the front panel lights (red) or blinks (red), four status LEDs
from “2” to “5” (D108 to D111/KY-660 board) lights as follows.
Error code
“1”
“2” to “5”
Possible cause
1
Light / Blink
*
The hardware has a problem.
2
Light / Blink
*
The hardware has a problem.
3
Light / Blink
*
Not used
4
Light / Blink
*
The fan has a problem.
5
Light / Blink
*
The temperature has risen.
6
Light / Blink
*
The power supply has a problem.
7
Light / Blink
*
Action around the Cell/B.E. chip on the BE-28A board has a problem.
8
Light / Blink
*
Action around the RSX chip on the BE-28A board has a problem.
9
Light / Blink
*
Not used
A
Light / Blink
*
Not used
B
Light / Blink
*
Not used
C
Light / Blink
*
Not used
D
Light / Blink
*
The lithium battery on the BE-28A board has a problem.
E
Light / Blink
*
The system control
*
3
has a problem.
F
Light / Blink
*
The system control
*
3
is operating in backup mode.
*
: With LEDs from “2” to “5”, indicates that the light is on, and indicates that the light is off.
Note: When LED “1” is unlit (normal operation), all the LEDs from “2” to “5” light up. However, when the unit starts in the backup mode with dip switch (S102/
KY-660 board) No. 1 (S102-1) inside the front panel turned ON, all the LEDs from “2” to “5” blink while LED “1” stays unlit.
*
3: The system control is the embedded CPU to start and shut down the system, and to monitor the state of the system.
2 3 4 5
2 3 4 5
2 3 4 5
2 3 4 5
2 3 4 5
2 3 4 5
2 3 4 5
2 3 4 5
2 3 4 5
2 3 4 5
2 3 4 5
2 3 4 5
2 3 4 5
2 3 4 5
2 3 4 5
Содержание MPE-200
