Sony MHC-V90W, Руководство по эксплуатации

Страница: 66 / 72

66
US
MHC-V90W.UC2.4-728-217- 11 (1)
Center” installed on your smartphone/
iPhone.
However, the software may be updated
automatically for stable use, etc., even
if you disable this function. Also, if you
disable this function, you can still update
the software manually.
For details about how to set and operate,
refer to the Help Guide.
The unit may not be operational while
updating.
Disclaimer regarding services
offered by third parties
Services offered by third parties may be
changed, suspended, or terminated
without prior notice. Sony does not
bear any responsibility in these sorts of
situations.
About Software version
This radio equipment is intended to be
used with the approved version(s) of
software that are indicated in the EU
Declaration of Conformity. The software
loaded on this radio equipment is
verified to comply with the essential
requirements of the Directive 2014/53/EU.
Software version: SYS _._ _
You can check the software version by
pressing OPTIONS on the remote control.
1
Press OPTIONS.
2
Press / repeatedly to select
the system, then press
.
3
Select “VERSION”, then press .
“SYS _._ _” appears on the display.
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(USA models only)
With 8 ohm loads, both channels
driven, from 250 Hz – 20,000 Hz; rated
95 watts per channel minimum RMS
power, with no more than 0.7% total
harmonic distortion from
250 milliwatts to rated output.
Satellite unit (Speaker System
SS-V90W)
Speaker system:
T Midrange speaker
Speaker unit:
Tweeter: 50 mm (2 in) × 4, cone
type
Midrange: 130 mm (5 in) × 4, cone
type
Rated impedance:
8 ohm
Subwoofer unit (Compact Disc
Receiver SA-V90W)
Speaker system:
Subwoofer, bass reflex
Speaker unit:
250 mm (10 in) × 2, cone type
Rated impedance:
8 ohm
Inputs
AUDIO/PARTY CHAIN IN L/R:
Voltage 2 V, impedance
47 kilohms
MIC1:
Sensitivity 1 mV, impedance
10 kilohms