Sony MHC-V90W, Руководство по эксплуатации

Страница: 59 / 72

59
US
Additional Inf
orma
tion
MHC-V90W.UC2.4-728-217- 11 (1)
BLUETOOTH device
Pairing cannot be performed.
•
•
Move the BLUETOOTH device
closer to the system.
•
•
Pairing may not be possible if
other BLUETOOTH devices are
present around the system.
In this case, turn off the other
BLUETOOTH devices.
• •
Make sure to enter the correct
passkey when selecting the
system’s name (this system) on
the BLUETOOTH device.
The BLUETOOTH device cannot
detect the system, or “RF OFF”
appears on the display.
•
•
Set the BLUETOOTH/Wi-Fi
signal to “WIFI OFF” or “RF ON”
(page 53).
Connection is not possible.
•
•
The BLUETOOTH device you
attempted to connect does not
support the A2DP profile, and
cannot be connected with the
system.
•
•
Enable the BLUETOOTH function of
the BLUETOOTH device.
•
•
Establish a connection from the
BLUETOOTH device.
•
•
The pairing registration
information has been erased.
Perform the pairing operation
again.
The sound skips or fluctuates, or
the connection is lost.
•
•
The system and the BLUETOOTH
device are too far apart.
•
•
If there are obstacles between
the system and your BLUETOOTH
device, remove or avoid the
obstacles.
•
•
If there is equipment that
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
The sound of your BLUETOOTH
device cannot be heard on this
system.
•
•
Increase the volume on your
BLUETOOTH device first, then
adjust the volume using VOL +/–.
There is severe hum, noise, or
distorted sound.
•
•
If there are obstacles between
the system and your BLUETOOTH
device, remove or avoid the
obstacles.
•
•
If there is equipment that
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
•
•
Turn down the volume of the
connected BLUETOOTH device.
Network connection
The system cannot connect to the
network. (Other equipment on the
network cannot find or recognize
the system.)
•
•
Check that is lit on the display.
•
•
It takes about 2 minutes for the
system to acquire an IP address
when the system is turned on in
a communication environment
without a router.
•
•
When you use a fixed IP address,
the same IP address may be
used by other equipment. Use a
different IP address.