Sony MHC-V90W, Руководство по эксплуатации

Страница: 21 / 72

21
US
Ge
tting S
tar
te
d
MHC-V90W.UC2.4-728-217- 11 (1)

AC power cord (mains lead)
Connect the AC power cord
(mains lead) (supplied) to the
unit, then to the wall outlet.
When the AC power cord (mains
lead) is connected, the system is
performing initialization. During
system initialization, “WELCOME”
appears on the display. While
the initializing is in progress, you
cannot turn on the system.
After initialization completes,
demonstration (page 25)
starts automatically. If you press

to turn on the system, the
demonstration ends.
Deactivating the
demonstration
To deactivate the demonstration
while the system is turned off, press
DISPLAY repeatedly to select the no
display mode (Power Saving Mode)
(page 25).
Inserting batteries
Insert the two supplied R03 (size
AAA) batteries, matching the
polarities shown below.
Note
•
•
Do not mix an old battery with a new
one or mix different types of batteries.
•
•
If you do not use the remote control
for a long period of time, remove the
batteries to avoid damage from battery
leakage and corrosion.
To operate the unit using the
remote control
Point the remote control at the unit’s
remote control sensor.