Sony MHC-V90W, Руководство по эксплуатации

Страница: 52 / 72

52
US
MHC-V90W.UC2.4-728-217- 11 (1)
Using optional
equipment
1
Press VOL – repeatedly until
“VOL MIN” appears on the
display.
2
Connect an optional equipment
(page 19).
3
Press FUNCTION repeatedly to
select “AUDIO IN”.
4
Start playing the connected
equipment.
5
Press VOL + repeatedly to adjust
the volume.
Note
The system may enter standby mode
automatically if the volume level of the
connected equipment is too low. Adjust
the volume level of the equipment.
To turn off automatic standby function,
see “Setting the automatic standby
function” (page 52).
Deactivating the touch
panel on the unit (Child
Lock)
You can deactivate the keys (except

) on the touch panel of the unit to
prevent misoperation, such as child
mischief.
Touch and hold

on the unit for
more than 5 seconds.
“CHILD LOCK ON” appears on the
display.
You can only operate the system using
the buttons on the remote control.
To turn off the Child Lock function,
touch and hold

on the unit for more
than 5 seconds until “CHILD LOCK OFF”
appears on the display.
Note
•
•
Child Lock function will be turned off
automatically when you disconnect the
AC power cord (mains lead).
•
•
Child Lock function cannot be activated
when you open the disc tray.
Setting the automatic
standby function
The system enters standby mode
automatically in about 15 minutes
when there is no operation or audio
signal output.
By default, the automatic standby
function is turned on.
1
Press OPTIONS.
2
Press / repeatedly to select
“AutoSTBY”, then press
.
3
Press / repeatedly to select
“ON” or “OFF”, then press
.
To exit the options menu, press
OPTIONS.
Note
• •
“AutoSTBY” flashes on the display about
2 minutes before entering standby
mode.
•
•
The automatic standby function does
not work in the following cases:
— during tuner function.
— when the Sleep Timer is activated.
— when microphone or guitar is
connected.